A study on the magneto-assisted spiral polishing on the inner wall of the bore with magnetic hot melt adhesive particles (MHMA particles)

NCUIR > Engineering College > Departmant of Mechanical Engineering > journal & Dissertation > Item 987654321/108251

Please use this identifier to cite or link to this item: https://ir.lib.ncu.edu.tw/handle/987654321/108251

Title:	A study on the magneto-assisted spiral polishing on the inner wall of the bore with magnetic hot melt adhesive particles (MHMA particles)
Authors:	顏炳華;Chen, Wei-Chan;Wu, Kun-Ling;Yan, Biing-Hwa;Tsao, Man-Chin
Contributors:	工學院機械工程學系
Keywords:	CAE) and Design;Computer-Aided Engineering (CAD;Engineering;Flux density;Industrial and Production Engineering;Magnetic fields;Magnetic flux;Magnetism;Mechanical Engineering;Media Management;Original Article;Parameter identification;Polishing;Rapid prototyping;Scratching;Slurries;Surface properties;Surface roughness;Turning (machining);Variance analysis;Viscosity;Workpieces
Date:	2013-11-01
Issue Date:	2026-04-23 14:40:28 (UTC+8)
Publisher:	Springer London;London: Springer London
Abstract:	摘要： The spiral polishing mechanism employed a fast turning screw rod to drive the abrasive for workpiece surface polishing. In this study, the powerful ring magnet installed around the workpiece would attract the self-developed magnetic hot melt adhesive particles (MHMA particles) during the process of polishing, driving the SiC particles against the workpiece, the inner wall of the bore. At the same time, the flexibility of MHMA particles helped improve the surface quality of the bore by preventing the SiC particles from heavily scratching it. The effects of magnetic flux density, size and concentration of SiC particles, concentration of MHMA particles, viscosity of silicone oil, revolution speed of the spindle as well as machining time and machining gap on operation temperature, slurry viscosity, surface roughness, and material removal were discussed and the best parameter combination was identified based on the results of the experiment. The effects of each machining parameter on the finished surface topography of the workpiece were also examined. Both analysis of variance and F -test indicated that magnetic flux density and the concentration of MHMA particles were the two most important variables affecting the surface roughness. In other words, magnetic force helped improve spiral polishing. Furthermore, the results showed that adding new MHMA particles to the slurry greatly improved the surface quality, at a rate of 90 %, and reduced the workpiece surface roughness from 0.9 μm down to 0.094 μm. 其他題名： Int J Adv Manuf Technol 出版者： London: Springer London 出版日期： 2013-11-01 出處： International journal of advanced manufacturing technology, 2013-11, Vol.69 (5-8), p.1791-1801 資源來源： EBSCOhost Academic Search Premier 版權： Springer-Verlag London 2013 版權： The International Journal of Advanced Manufacturing Technology is a copyright of Springer, (2013). All Rights Reserved. 識別號： ISSN: 0268-3768 識別號： EISSN: 1433-3015 識別號： DOI: 10.1007/s00170-013-5139-y
Appears in Collections:	[Departmant of Mechanical Engineering ] journal & Dissertation

Files in This Item:

File	Description	Size	Format
index.html		0Kb	HTML	15	View/Open

社群 sharing

Loading...