Air plasma treated chitosan fibers-stacked scaffolds

NCU Institutional Repository > 工學院 > 機械工程學系 > 期刊論文 > Item 987654321/108294

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://ir.lib.ncu.edu.tw/handle/987654321/108294

题名:	Air plasma treated chitosan fibers-stacked scaffolds
作者:	曾清秀;Hsu, Shan-hui;Lin, Chen-Huan;Tseng, Ching-Shiow
贡献者:	工學院機械工程學系
关键词:	Air plasma;Animals;Biotechnology - instrumentation;Biotechnology - methods;Bones;Cell Adhesion - drug effects;Cell Line;Cell Proliferation - drug effects;Chitosan;Chitosan - chemistry;Chitosan - pharmacology;Contact angle;Deposition;liquid-frozen deposition manufacturing;Mice;Osteoblasts;Plasma Gases - chemistry;Roughness;Scaffolds;Three dimensional;Tissue Engineering - instrumentation;Tissue Scaffolds
日期:	2012-03-01
上传时间:	2026-04-23 14:42:04 (UTC+8)
出版者:	IOP Publishing Ltd.;England: IOP Publishing
摘要:	摘要： Chitosan is a nontoxic, biodegradable and biocompatible polymer. Rapid prototyped chitosan scaffolds were manufactured by liquid-frozen deposition of chitosan fibers in this study. To investigate if the air plasma (AP) treatment could be used to improve the surface properties of these scaffolds for cell attachment, chitosan films were first prepared and treated with AP under different conditions. Under the optimized condition, the water contact angle of chitosan films was significantly reduced from 90 ± 1° to 19 ± 1° after AP treatment. On the other hand, the surface charge and nanometric roughness of chitosan films increased after AP treatment. X-ray photoelectron spectroscopy measurement on AP-treated three-dimensional chitosan scaffolds showed that nitrogen and oxygen increased at each location inside the scaffolds as compared to the untreated ones, which indicated that AP could permeate through the fibrous stacks of the scaffolds and effectively modify the interior (visible) surface of the scaffolds. Moreover, AP treatment enabled the migration of MC3T3-E1 cells into the scaffolds, facilitated their proliferation and promoted the bone mineral deposition. These results suggested that fibers-stacked chitosan scaffolds may be produced by liquid-frozen deposition and treated with AP for bone tissue engineering applications. 其他題名： BF 其他題名： Biofabrication 出版者： England: IOP Publishing 出版日期： 2012-03-01 出處： Biofabrication, 2012-03, Vol.4 (1), p.015002-1-13 資源來源： Institute of Physics Journals 版權： 2012 IOP Publishing Ltd 識別號： ISSN: 1758-5082 識別號： ISSN: 1758-5090 識別號： EISSN: 1758-5090 識別號： DOI: 10.1088/1758-5082/4/1/015002 識別號： PMID: 22257983
显示于类别:	[機械工程學系] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	13	检视/开启

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing

数据加载中.....