中大學術數位典藏-NCU Institutional Repository-提供博碩士論文、考古題、期刊論文、研究計畫等下載:Item 987654321/108537
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 94274/94274 (100%)
造訪人次 : 82915604      線上人數 : 2218
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋


    請使用永久網址來引用或連結此文件: https://ir.lib.ncu.edu.tw/handle/987654321/108537


    題名: Controlled continuous tapering chitosan-poly(ethylene oxide) nanofibers using a differential voltage regulation in near-field electrospinning
    作者: 傅尹坤;Fuh, Yiin-Kuen;Chen, Sheng Zhan
    貢獻者: 工學院機械工程學系
    日期: 2013-09-01
    上傳時間: 2026-04-23 14:54:15 (UTC+8)
    出版者: American Scientific Publishers;26650 The Old Road, Suite 208, Valencia, California 91381-0751, USA: American Scientific Publishers
    摘要: 摘要: This paper reports a differential voltage regulation (DVR) via near-field electrospinning (NFES) to obtain continuous tapering chitosan-poly(ethylene oxide) nanofibers with decreasing diameters of 1000 to 250 nm. The key parameters were applied differential voltage in the range of 800 to 400 V and voltage regulation time at 1-3 seconds. A controlled continuous deposition chart has been experimentally constructed and parallel nanofibers as well as grid patterns with decreasing diameters are successfully obtained via the low-voltage operation of 400 V. Both DVR and low-voltage regime minimize bending instabilities and patterning perturbations of polymer jet inevitably encountered in higher voltage ranges of conventional far-field electrospinning. In addition, we have successfully demonstrated the feasibility to continuously pattern nanofibers on two-dimensional (2D) and three-dimensional (3D) substrates. This novel yet simple fabrication route will promise the use of electrospun nanofibers based interconnection and customized patterning for advanced fabrics such as biomimic scaffolds in tissue engineering.
    出版者: 26650 The Old Road, Suite 208, Valencia, California 91381-0751, USA: American Scientific Publishers
    出版日期: 2013-09-01
    出處: Advanced science letters, 2013-09, Vol.19 (9), p.2658-2661
    識別號: ISSN: 1936-6612
    識別號: EISSN: 1936-7317
    識別號: DOI: 10.1166/asl.2013.5014
    顯示於類別:[機械工程學系] 期刊論文

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    index.html0KbHTML17檢視/開啟


    在NCUIR中所有的資料項目都受到原著作權保護.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明