American Scientific Publishers;26650 The Old Road, Suite 208, Valencia, California 91381-0751, USA: American Scientific Publishers
摘要:
摘要： The ultrasonic vibration system with ram motion of two steps is developed to optimize the formability for thin workpiece at the end of forming. The deep drawing force and forming height can be predicted in view of optimizing the values of the working variables involved in the process parameters. A response surface methodology (R.S.M.) based on design of experiments was used in order to minimize the forming force and maximum the forming height during the deep drawing process. Associated plots are shown to be efficient for a quick choice of the optimum values of the forming process parameters. 出版者： 26650 The Old Road, Suite 208, Valencia, California 91381-0751, USA: American Scientific Publishers 出版日期： 2012-07-01 出處： Advanced science letters, 2012-07, Vol.14 (1), p.389-393 識別號： ISSN: 1936-6612 識別號： EISSN: 1936-7317 識別號： DOI: 10.1166/asl.2012.4043
