Deep drawing modeling of controlled forming parameters using surface response methodology

NCU Institutional Repository > 工學院 > 機械工程學系 > 期刊論文 > Item 987654321/108564

請使用永久網址來引用或連結此文件: https://ir.lib.ncu.edu.tw/handle/987654321/108564

題名:	Deep drawing modeling of controlled forming parameters using surface response methodology
作者:	葉維磬;Chu, Tsuhsiao;Fuh, Kuanghua;Yeh, Weiching
貢獻者:	工學院機械工程學系
關鍵詞:	Deep drawing;Design of experiments;Formability;Forming;Mathematical models;Optimization;Process parameters;Workpieces
日期:	2012-07-01
上傳時間:	2026-04-23 14:55:11 (UTC+8)
出版者:	American Scientific Publishers;26650 The Old Road, Suite 208, Valencia, California 91381-0751, USA: American Scientific Publishers
摘要:	摘要： The ultrasonic vibration system with ram motion of two steps is developed to optimize the formability for thin workpiece at the end of forming. The deep drawing force and forming height can be predicted in view of optimizing the values of the working variables involved in the process parameters. A response surface methodology (R.S.M.) based on design of experiments was used in order to minimize the forming force and maximum the forming height during the deep drawing process. Associated plots are shown to be efficient for a quick choice of the optimum values of the forming process parameters. 出版者： 26650 The Old Road, Suite 208, Valencia, California 91381-0751, USA: American Scientific Publishers 出版日期： 2012-07-01 出處： Advanced science letters, 2012-07, Vol.14 (1), p.389-393 識別號： ISSN: 1936-6612 識別號： EISSN: 1936-7317 識別號： DOI: 10.1166/asl.2012.4043
顯示於類別:	[機械工程學系] 期刊論文

文件中的檔案:

檔案	描述	大小	格式	瀏覽次數
index.html		0Kb	HTML	14	檢視/開啟

在NCUIR中所有的資料項目都受到原著作權保護.

社群 sharing