English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 94201/94201 (100%)
造訪人次 : 81834389      線上人數 : 2545
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋


    請使用永久網址來引用或連結此文件: https://ir.lib.ncu.edu.tw/handle/987654321/108566


    題名: Determining the maximum overburden along thrust faults using a porosity versus effective confining pressure curve
    作者: 董家鈞;Wu, Wen-Jie;Dong, Jia-Jyun
    貢獻者: 地球科學學院應用地質研究所
    關鍵詞: Compaction curve;Confining;Erosion;Faults;Geology;Porosity;Rocks;Stress history;Stresses;TCDP;Thrust;Thrusting
    日期: 2012-11-20
    上傳時間: 2026-04-23 14:55:14 (UTC+8)
    出版者: Elsevier;Elsevier B.V
    摘要: 摘要: This study aims to quantify the tectonically induced thrusting and erosion. Here, we propose and evaluate a laboratory-based method for determining the maximum effective stress ever sustained by a sedimentary-rock formation. The porosities of nineteen samples collected from two deep boreholes of the Taiwan Chelungpu-Fault Drilling Project were measured under different confining stresses. The relation between measured porosity and confining pressure (compaction curve) is bilinear in log–log scale. The maximum effective stress of the tested rocks was determined from the intersection point of the two straight lines of the compaction curve. The maximum effective stresses of the rocks below the Sanyi Fault (reverse fault) are close to the in-situ vertical effective stress. Above the Sanyi Fault (hanging wall), where the rocks have been thrust, the maximum effective stresses of the rocks are significantly greater than the in-situ stress with an average value of 29.48MPa. That is, the eroded thickness of the formation on the hanging wall of the Sanyi Fault is 2482m, a value close to that determined from the geological profile (2773m). It is inferred that the total displacements along the thrust Sanyi Fault is 11.5km, a value close to that determined from the geological profile (14–16km). These results indicate that the proposed laboratory-based method is potentially useful for determining the thrusting and erosion in a fold–thrust belt and the total displacements along a thrust fault. ► Stress history is preserved in the compaction curves of sediments. ► The maximum overburden above the reverse fault is greater than the present vertical stress. ► The thickness of the eroded strata is 2482m based on compaction curves measured in the laboratory. ► The thickness of the eroded strata is 2773m based on a conventional regional method. ► The eroded strata were successfully estimated by our laboratory-based local method.
    出版者: Elsevier B.V
    出版日期: 2012-11-20
    出處: Tectonophysics, 2012-11, Vol.578, p.63-75
    資源來源: Elsevier ScienceDirect Journals Complete
    版權: 2011 Elsevier B.V.
    識別號: ISSN: 0040-1951
    識別號: EISSN: 1879-3266
    識別號: DOI: 10.1016/j.tecto.2011.12.028
    顯示於類別:[應用地質研究所] 期刊論文

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    index.html0KbHTML15檢視/開啟


    在NCUIR中所有的資料項目都受到原著作權保護.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明