Adsorption–desorption characteristics of methyl ethyl ketone with modified activated carbon and inhibition of 2,3-butanediol production

NCU Institutional Repository > 工學院 > 環境工程研究所 > 期刊論文 > Item 987654321/108598

請使用永久網址來引用或連結此文件: https://ir.lib.ncu.edu.tw/handle/987654321/108598

題名:	Adsorption–desorption characteristics of methyl ethyl ketone with modified activated carbon and inhibition of 2,3-butanediol production
作者:	張木彬;Nien, Kai Chun;Chang, Feng Tang;Chang, Moo Been
貢獻者:	工學院環境工程研究所
關鍵詞:	Activated carbon;Adsorption;Air conditioning;Butanones - chemistry;Butylene Glycols - analysis;Carbon;Charcoal - chemistry;Chemicals;Desorption;Fires;Ignition;Inhibition;Ketones;Methyl ethyl ketone;Organic compounds;Oxidation;Solvents;Solvents - chemistry;VOCs;Volatile organic compounds;Waste Disposal, Fluid - methods
日期:	2015-11-02
上傳時間:	2026-04-23 14:57:56 (UTC+8)
出版者:	Taylor and Francis Ltd.;United States: Taylor & Francis
摘要:	摘要： Activated carbon (AC) is seldom applied for recovering ketone-based volatile organic compounds because of safety concerns. Adsorption of methyl ethyl ketone (MEK) with AC is a highly exothermic reaction that potentially causes fires in AC beds. Moreover, 2,3-butanediol (BDO) is produced in the desorbed solvent, causing yellowing and odor of the recovered solvent. This study applied a continuous adsorption-desorption apparatus for evaluating the operating capacities and BDO concentration in recovered MEK containing modified and original ACs. AC-1 (TAKETA- G2X) was used as the target for modification. The experimental results indicate that using MgO as the modifier increases the ignition point by 12°C and that applying KNO 3 as the modifier reduces the AC ignition point by 28°C (compared with AC-1). The BDO concentration of the desorbed MEK solvent can be reduced by increasing the loading of the modifying agent (Ethanolamine) (Im-1: 3.1 wt%; Im-5: 6.2 wt%). Moreover, applying the AC pretreated with nitrogen (Im-6) as adsorbent significantly reduces the BDO concentration (from 0.123 wt% to 0.073 wt%). Because desorption and purging procedures were performed in N 2 atmospheres, the BDO concentrations of the desorbed MEK solvents were relatively low and ranged from 0.032 wt% to 0.043 wt%. When the MEK concentration was reduced to 2000 ppm, lower BDO concentrations (0.012-0.022 wt%) were measured in the recovered MEK solvent. The way to modify activated carbon and a better desorbing sequence to effectively inhibit the oxidation of MEK to BDO are developed. The results obtained indicate that the BDO concentration in the desorbed solvent was lower than the original MEK solvent (0.023 wt%). Different approaches can be applied simultaneously to achieve high inhibition effects; however, carbon adsorption performance may be negatively affected. Implications: The study is motivated to improve the quality of recovered solvent and reduce fire hazards, particularly when AC is applied for adsorbing a ketone-based solvent (e.g., MEK). The experimental results indicate that the BDO concentration in the recovered solvent can be reduced and the ignition point of AC can be increased by modifying the AC with an appropriate agent. 其他題名： J Air Waste Manag Assoc 出版者： United States: Taylor & Francis 出版日期： 2015-11-02 出處： Journal of the Air & Waste Management Association (1995), 2015-11, Vol.65 (11), p.1317-1326 資源來源： Taylor & Francis Journals Auto-Holdings Collection 版權： Copyright © 2015 A&WMA 2015 版權： Copyright Taylor & Francis Ltd. 2015 識別號： ISSN: 1096-2247 識別號： EISSN: 2162-2906 識別號： DOI: 10.1080/10962247.2015.1084399 識別號： PMID: 26484974
顯示於類別:	[環境工程研究所 ] 期刊論文

文件中的檔案:

檔案	描述	大小	格式	瀏覽次數
index.html		0Kb	HTML	10	檢視/開啟

在NCUIR中所有的資料項目都受到原著作權保護.

社群 sharing

資料載入中.....