Effect of space distance for boiling heat transfer on micro porous coated surface in confined space

NCU Institutional Repository > 工學院 > 機械工程學系 > 期刊論文 > Item 987654321/108712

請使用永久網址來引用或連結此文件: https://ir.lib.ncu.edu.tw/handle/987654321/108712

題名:	Effect of space distance for boiling heat transfer on micro porous coated surface in confined space
作者:	楊建裕;Liu, Chien-Fu;Yang, Chien-Yuh
貢獻者:	工學院機械工程學系
關鍵詞:	Applied sciences;Boiling;Boiling heat transfer;Coating;Confined space;Confinement;Energy;Energy. Thermal use of fuels;Exact sciences and technology;Heat flux;Heat transfer;Heat transfer coefficients;Liquids;Methyl alcohol;Micro porous coating;Theoretical studies. Data and constants. Metering
日期:	2013-10-01
上傳時間:	2026-04-23 15:02:51 (UTC+8)
出版者:	Elsevier Inc.;Amsterdam: Elsevier Inc
摘要:	摘要： This work provides an experimental analysis of the boiling heat transfer of methanol on plain and micro porous coated surfaces inside confined space. Three space confinements with distance of 1.0, 2.0, 3.0mm and an unconfined space were tested on plain and micro porous coating surfaces. Effects of space confinement, surface treatment and heat flux on the heat transfer coefficient and critical heat flux were discussed. From the test results, we may deduct that the boiling heat transfer performance in confined spaces was affected by four major effects, i.e. (a) vapor blowing and liquid suction effect, (b) thin film evaporation, (c) vapor leaving resistance and (d) partial dryout effect on plain surface. But only (a) and (c) are important on micro porous coating surface. The combination of these effects resulted in the micro porous to plain surfaces heat transfer enhancement ratio to have different characteristics at low, moderate and high heat flux conditions. Micro porous coating is a very effective boiling heat transfer enhancement treatment at low and moderate heat fluxes conditions. The enhancement ratio reduced in very narrow space confinement or at very high heat flux condition. 出版者： Amsterdam: Elsevier Inc 出版日期： 2013-10-01 出處： Experimental thermal and fluid science, 2013-10, Vol.50, p.163-171 版權： 2013 Elsevier Inc. 版權： 2014 INIST-CNRS 識別號： ISSN: 0894-1777 識別號： EISSN: 1879-2286 識別號： DOI: 10.1016/j.expthermflusci.2013.06.004
顯示於類別:	[機械工程學系] 期刊論文

文件中的檔案:

檔案	描述	大小	格式	瀏覽次數
index.html		0Kb	HTML	24	檢視/開啟

在NCUIR中所有的資料項目都受到原著作權保護.

社群 sharing

資料載入中.....