Flow stress behaviour of ABS (acrylonitrile–butadiene–styrene) at elevated temperature and application to the thermal vacuum forming process

NCU Institutional Repository > 工學院 > 機械工程學系 > 期刊論文 > Item 987654321/108887

請使用永久網址來引用或連結此文件: https://ir.lib.ncu.edu.tw/handle/987654321/108887

題名:	Flow stress behaviour of ABS (acrylonitrile–butadiene–styrene) at elevated temperature and application to the thermal vacuum forming process
作者:	傅尹坤;Fuh, Yiin-Kuen;Lee, Shyong;Chu, Chun-Lin
貢獻者:	工學院機械工程學系
關鍵詞:	ABS plastics;constitutive equation;Flow stress;temperature effect;thermal forming;uneven thickness
日期:	2015-10-02
上傳時間:	2026-04-23 15:12:31 (UTC+8)
出版者:	Taylor and Francis Ltd.;Taylor & Francis
摘要:	摘要： A conventional plastic processing method, vacuum thermal forming, is adopted for manufacturing the large-size rear back of the TV set. The candidate material is the widely used engineering plastic, acrylonitrile-butadiene-styrene (ABS). The basic principle of thermal forming process is to place a heated plastic sheet on a die and clamp with a cover plate whose function is to seal around circumference to establish a vacuum or pressurised compartment. Thus, the softened sheet as being preheated will progress towards and fill up the die underneath when vacuum or pressure is applied. The major problem with thermal forming could be the uneven thickness distribution. To tackle this issue, computer simulation can be an advantageous tool to minimise the number of try-and-error experiments. To run computer simulation for thermal forming, flow behaviour of the ABS is needed as the computer input. Thus, stress-strain relation obtained by tensile tests at various elevated temperatures and strain rate is essential for performing computer simulation work. The constitutive equation based on the widely power law was established. The application was applied to simulate the vacuum thermoforming process of a large-size back cover of television set and the major problem of uneven thickness distribution was successfully simulated with suggested prevention design. 出版者： Taylor & Francis 出版日期： 2015-10-02 出處： Advances in materials and processing technologies (Abingdon, England), 2015-10, Vol.1 (3-4), p.599-609 版權： 2016 Taylor & Francis 2016 識別號： ISSN: 2374-068X 識別號： EISSN: 2374-0698 識別號： DOI: 10.1080/2374068X.2015.1147735
顯示於類別:	[機械工程學系] 期刊論文

文件中的檔案:

檔案	描述	大小	格式	瀏覽次數
index.html		0Kb	HTML	14	檢視/開啟

在NCUIR中所有的資料項目都受到原著作權保護.

社群 sharing

資料載入中.....