Groove configurations of a flux-cored arc welding process used in critical structures of precision mechanical presses—mechanical and metallurgical studies

NCUIR > Engineering College > Departmant of Mechanical Engineering > journal & Dissertation > Item 987654321/108892

Please use this identifier to cite or link to this item: https://ir.lib.ncu.edu.tw/handle/987654321/108892

Title:	Groove configurations of a flux-cored arc welding process used in critical structures of precision mechanical presses—mechanical and metallurgical studies
Authors:	傅尹坤;Ling, Kuo-Hsia;Fuh, Yiin-Kuen;Wu, Kun-Ling;Kuo, Tin-Chun;Huang, Chung-Yu
Contributors:	工學院機械工程學系
Keywords:	Arc welding;CAE) and Design;Computer-Aided Engineering (CAD;Configurations;Engineering;Flux core wire welding;Grain refinement;Grooves;Heat affected zone;Impact strength;Impact tests;Industrial and Production Engineering;Mechanical Engineering;Mechanical presses;Mechanical properties;Media Management;Metallurgical analysis;Microhardness;Microstructure;Optical microscopes;Original Article;Structural steels;Ultimate tensile strength;Welded joints;Welding fluxes;Yield strength
Date:	2015-06-18
Issue Date:	2026-04-23 15:12:51 (UTC+8)
Publisher:	Springer London;London: Springer London
Abstract:	摘要： This paper utilized a flux-cored arc welding (FCAW) technique and investigated various groove configurations as well as multi-pass welding sequences to create welding specifications in the precision mechanical press industry. Experimental investigations were conducted to examine the influence of three different groove configurations of 40-mm-thick JIS SS400 structural steel welded joints on mechanical and metallurgical properties. Mechanical properties of the welded joints were evaluated by uniaxial tensile testing and Charpy V-notch (CVN) impact testing at room temperature. Simultaneously after a multi-pass welding sequence, various degrees of thermal treatments such as tempering or normalization inevitably occur in the heat-affected zone (HAZ). The unfavorable microstructures in the HAZ and reheated zones can be intentionally modified via the above procedure such that the toughness and microhardness of the HAZ improve. The experimental results revealed that of the three types of groove configurations (C1, C, and F), groove type C1 possessed the maximum yield strength (YS) and ultimate tensile strength (UTS) while groove type F possessed the highest CVN values tested at room temperature. The fundamental reason may be attributed to heat dissipation characteristics of each groove configuration and associated exertion of the multi-pass welding sequence. Microstructural and morphological features as revealed through an optical microscope also indicate a significant influential factor of these joints among the different groove configurations. Therefore, grain refinement of varying degrees can be obtained due to the variation of thermal characteristics of heat input/dissipation; thus, various mechanical and CVN impact properties can be obtained. 其他題名： Int J Adv Manuf Technol 出版者： London: Springer London 出版日期： 2015-06-01 出處： International journal of advanced manufacturing technology, 2015-06, Vol.78 (9-12), p.1905-1916 資源來源： EBSCOhost Academic Search Premier 版權： Springer-Verlag London 2015 版權： The International Journal of Advanced Manufacturing Technology is a copyright of Springer, (2015). All Rights Reserved. 識別號： ISSN: 0268-3768 識別號： EISSN: 1433-3015 識別號： DOI: 10.1007/s00170-014-6766-7
Appears in Collections:	[Departmant of Mechanical Engineering ] journal & Dissertation

Files in This Item:

File	Description	Size	Format
index.html		0Kb	HTML	21	View/Open

社群 sharing

Loading...