 |
English
|
正體中文
|
简体中文
|
全文筆數/總筆數 : 94274/94274 (100%)
造訪人次 : 82906556
線上人數 : 2402
|
|
|
資料載入中.....
|
請使用永久網址來引用或連結此文件:
https://ir.lib.ncu.edu.tw/handle/987654321/108923
|
| 題名: | Induction heating with the ring effect for injection molding plates |
| 作者: | 黃俊仁;Lin, Hsuan-Liang;Chen, Shia-Chung;Jeng, Ming-Chang;Minh, Pham Son;Chang, Jen-An;Hwang, Jiun-Ren |
| 貢獻者: | 工學院機械工程學系 |
| 關鍵詞: | Applied sciences;Cross-disciplinary physics: materials science;rheology;Deformation;material flow;Dynamic mold temperature control;Exact sciences and technology;Induction heating;Inductor design;Injection molding;Injection moulding;Machinery and processing;Moulding;Physics;Plastics;Polymer industry, paints, wood;Rheology;Technology of polymers |
| 日期: | 2012-04-01 |
| 上傳時間: | 2026-04-23 15:15:06 (UTC+8) |
| 出版者: | Elsevier Ltd.;Kidlington: Elsevier Ltd |
| 摘要: | 摘要： Induction heating in injection molding has the advantages of rapid heating, reduced cycle time, and improved product quality. In this research, using both experiment and simulation, externally wrapped coil induction heating was applied to verify the heating capacity of a pair of mold plates. By applying different coil designs and mold gap, the effect of the externally wrapped coil induction heating was evaluated. Results showed that when a serial coil was used as an inductor, the heating rate reached 8.0°C/s. From an initial mold temperature of 40°C, after 15s heating, the mold surface temperature reached 159.9°C with the serial coil. The parallel coil shows a better heating uniformity but its heating rate is far lower than the serial coil. For the serial coil, the temperature distribution between the core and cavity plate are almost the same. The heating rate increases from 4.9°C/s to 10.6°C/s when the inductor design is changed from 5 turns to 7 turns. After 15s heating, the temperature at point T2 increases from 40°C to 166.7°C and 106.1°C with a mold gap of 1mm, and 6mm, respectively.
出版者： Kidlington: Elsevier Ltd
出版日期： 2012-04-01
出處： International communications in heat and mass transfer, 2012-04, Vol.39 (4), p.514-522
資源來源： Elsevier ScienceDirect Journals
版權： 2012
版權： 2015 INIST-CNRS
識別號： ISSN: 0735-1933
識別號： EISSN: 1879-0178
識別號： DOI: 10.1016/j.icheatmasstransfer.2012.02.009
識別號： CODEN: IHMTDL |
| 顯示於類別: | [機械工程學系] 期刊論文
|
文件中的檔案:
| 檔案 |
描述 |
大小 | 格式 | 瀏覽次數 |
|---|
| index.html | | 0Kb | HTML | 23 | 檢視/開啟 |
|
在NCUIR中所有的資料項目都受到原著作權保護.
|
::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期：8-24-2009 :::
