摘要： The laser interferometer has been implemented for the precision displacement measurement and calibration, due to its high resolution of the nanometer order and the large measuring range. Multibeam interferometry is often used for the micro-displacement, because of its common optical path structure being resistive to the environmental disturbances. The conventional multibeam interferometers like Fabry-Perot interferometers are composed by two approximately parallel planar mirrors. With this optical structure, the measuring range will be constrained in micrometers. In this investigation, a modified multibeam interferometer with corner-cube prism has been proposed to resolve the problem. With the new arrangement of the optical path, the displacement measurement will be insensitive to the tilt angle and the optical resolution will be better than that of the conventional multibeam interferometer with two planar mirrors. This will be beneficial to realize the high precision displacement in the large measuring range and under the uncomplicated measuring condition. The experimental results show that the standard deviation is about 0.255 m in measuring range of 160 mm, if the tilt angle is less than ±9." That also proves that the proposed interferometer is feasible for precision displacement measurement in the large range. 其他題名： Sen Lett 出版者： American Scientific Publishers 出版日期： 2012-05-01 出處： Sensor letters, 2012-05, Vol.10 (5), p.1109-1112 識別號： ISSN: 1546-198X 識別號： DOI: 10.1166/sl.2012.2302
