摘要： This paper proposes a methodology to link the discrete element method (DEM) with the finite element analysis (FEA) to evaluate the loading of particulate solid on a contacting structure or machine. The mathematical formulation to convert the DEM boundary contact forces to the nodal forces and moments in triangular finite elements was derived based on the concept of shape function. To prove the feasibility of this proposed methodology, two numerical examples, confined compression and confined expansion of steel beads filled in a cylindrical container, were analysed. The DEM calculations for discrete steel beads were performed using the PFC3D code. The outputs from the DEM simulations were extracted and processed into ABAQUS FEA input decks by the proposed method. A finite element analysis was executed to calculate the stress distribution in the continuum steel cylinder for the two examples using a linear shell analysis. The DEM and FEA results were presented and discussed in this paper. The results show that the proposed methodology can provide an effective way to determine the stress distribution in contacting structures subjected to loading from particulate assemblies and can be applied to solve solid–structure interaction problems. The proposed methodology is not applicable to the cases where wall friction is significant. The following figure shows the contact force chain diagram for steel beads confined in a cylindrical container subjected to axial-directional compression and the corresponding FEA Mises stress distribution in the cylindrical wall. [Display omitted] ► This paper proposes a methodology to link DEM with FEA to evaluate the effect of the particle forces on a contacting structure. ► The DEM boundary contact forces are transformed into the nodal forces and moments in triangular finite elements using the concept of shape function. ► The methodology provides a direct and effective means to determine the stresses in the contacting structure resulting from the particulate solid. 出版者： Amsterdam: Elsevier B.V 出版日期： 2012-02-01 出處： Powder technology, 2012-02, Vol.217, p.107-120 資源來源： Elsevier ScienceDirect Journals Complete 版權： 2011 Elsevier B.V. 版權： 2015 INIST-CNRS 識別號： ISSN: 0032-5910 識別號： EISSN: 1873-328X 識別號： DOI: 10.1016/j.powtec.2011.10.016 識別號： CODEN: POTEBX
