Mechanical behaviour of a granular solid and its contacting deformable structure under uni-axial compression-Part II: Multi-scale exploration of internal physical properties

NCU Institutional Repository > 工學院 > 機械工程學系 > 期刊論文 > Item 987654321/108957

請使用永久網址來引用或連結此文件: https://ir.lib.ncu.edu.tw/handle/987654321/108957

題名:	Mechanical behaviour of a granular solid and its contacting deformable structure under uni-axial compression-Part II: Multi-scale exploration of internal physical properties
作者:	鍾雲吉;Chung, Y.C.;Lin, C.K.;Ai, J.
貢獻者:	工學院機械工程學系
關鍵詞:	Confined compression;Contact;Contact angle;Contact force;Contact stresses;DEM;Friction;Granular assembly;Internal property;Mathematical analysis;Multi-scale analysis;Ring measurement cell;Vectors (mathematics);Walls
日期:	2016-04-22
上傳時間:	2026-04-23 15:17:39 (UTC+8)
出版者:	Elsevier BV;Elsevier Ltd
摘要:	摘要： Following the previous companion paper, the proposed DEM model has been carefully validated and produced reasonable to good agreement with the corresponding laboratory experiments. This paper confidently probes the internal physical properties and extensively understands the multi-scale (macro-meso-micro scale) relationships in this granular system subjected to confined compression. The particle von Mises stress was proposed to effectively identify the direction and magnitude of strong force chains. Ring measurement cells were developed to calculate the spatial distributions of solid fraction, coordination number, friction mobilized factor, contact force vectors and stresses. The diagrams of contact force vectors were proposed to show the mechanism of force transmission onto the cylindrical wall. In addition, the statistical analyses for contact forces and mobilized friction were evaluated in this paper. Several key findings are highlighted as follows: (1) the force drop in the load–displacement response is attributed to some local reorganization of force chains; (2) the profiles of the contact force vectors transmitted onto the cylindrical wall match with those for macroscopic wall traction; (3) the contact force vectors on the cylindrical wall are mostly parallel with each other and make a specific angle with the horizontal, indicating the full friction mobilization on the cylindrical wall; (4) the inter-particle friction is more mobilized at the lower part than at the higher part during confined compression; (5) the radial, circumferential and vertical stresses within the bulk solid generally decay with depth in spite of some disorder; (6) The inter-particle and particle-wall contacts exhibit distinctive statistical patterns for contact forces and mobilized friction; (7) the mechanical response of this compressed granular system is transversely isotropic; (8) the contact forces are directed more vertically with depth, making the macro lateral pressure ratio decrease with depth. •The mechanical response of this compressed granular system is transversely isotropic.•The force drop in the FD curve is attributed to local reorganization of force chains.•The contact force vectors onto the boundary wall match the macroscopic wall traction.•The inter-particle friction is more mobilized at lower part than at higher part.•The inter-particle and particle-wall contacts show distinctive statistical patterns. 出版者： Elsevier Ltd 出版日期： 2016-04-22 出處： Chemical engineering science, 2016-04, Vol.144, p.421-443 資源來源： ScienceDirect (Journals) 版權： 2016 Elsevier Ltd 識別號： ISSN: 0009-2509 識別號： EISSN: 1873-4405 識別號： DOI: 10.1016/j.ces.2016.01.026
顯示於類別:	[機械工程學系] 期刊論文

文件中的檔案:

檔案	描述	大小	格式	瀏覽次數
index.html		0Kb	HTML	22	檢視/開啟

在NCUIR中所有的資料項目都受到原著作權保護.

社群 sharing

資料載入中.....