摘要： This paper is the first time to design a new die for the deep drawing with the ultrasonic vibration and servo press. The deep drawing force and depth are modelled based on three design variables, drawing speed, the ratio of ram motion and vibration amplitude. The experimental results of two materials, SPCC and Al 5052, are the source data used in the response surface methodology setting. Three dimensional response surfaces and planner contours of the drawing force and forming depth are drawn, which show the relationship between the response and the working parameters. The achievable drawing force and drawing depth are appreciably better when compared that obtained by the conventional drawing process. 出版者： Taylor & Francis 出版日期： 2014-05-01 出處： Materials research innovations, 2014-05, Vol.18 (sup2), p.S2-936-S2-939 版權： W. S. Maney & Son Ltd 2014 2014 識別號： ISSN: 1432-8917 識別號： EISSN: 1433-075X 識別號： DOI: 10.1179/1432891714Z.000000000555
