Registration of 2D C-Arm and 3D CT Images for a C-Arm Image-Assisted Navigation System for Spinal Surgery

NCU Institutional Repository > 工學院 > 機械工程學系 > 期刊論文 > Item 987654321/109034

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://ir.lib.ncu.edu.tw/handle/987654321/109034

题名:	Registration of 2D C-Arm and 3D CT Images for a C-Arm Image-Assisted Navigation System for Spinal Surgery
作者:	曾清秀;Chu, Hong-Yu;Tse, Alex;Lin, Geng-Li;Chang, Chih-Ju;Tseng, Ching-Shiow
贡献者:	工學院機械工程學系
日期:	2015-01-01
上传时间:	2026-04-23 15:25:58 (UTC+8)
出版者:	Hindawi Limited;Cairo, Egypt: Hindawi Publishing Corporation
摘要:	摘要： C-Arm image-assisted surgical navigation system has been broadly applied to spinal surgery. However, accurate path planning on the C-Arm AP-view image is difficult. This research studies 2D-3D image registration methods to obtain the optimum transformation matrix between C-Arm and CT image frames. Through the transformation matrix, the surgical path planned on preoperative CT images can be transformed and displayed on the C-Arm images for surgical guidance. The positions of surgical instruments will also be displayed on both CT and C-Arm in the real time. Five similarity measure methods of 2D-3D image registration including Normalized Cross-Correlation, Gradient Correlation, Pattern Intensity, Gradient Difference Correlation, and Mutual Information combined with three optimization methods including Powell’s method, Downhill simplex algorithm, and genetic algorithm are applied to evaluate their performance in converge range, efficiency, and accuracy. Experimental results show that the combination of Normalized Cross-Correlation measure method with Downhill simplex algorithm obtains maximum correlation and similarity in C-Arm and Digital Reconstructed Radiograph (DRR) images. Spine saw bones are used in the experiment to evaluate 2D-3D image registration accuracy. The average error in displacement is 0.22 mm. The success rate is approximately 90% and average registration time takes 16 seconds. 其他題名： Appl Bionics Biomech 出版者： Cairo, Egypt: Hindawi Publishing Corporation 出版日期： 2015-01-01 出處： Applied Bionics and Biomechanics, 2015-01, Vol.2015 (2015), p.1-9 資源來源： Publicly available content database 版權： Copyright © 2015 Chih-Ju Chang et al. 版權： Copyright © 2015 Chih-Ju Chang et al. 2015 識別號： ISSN: 1176-2322 識別號： ISSN: 1754-2103 識別號： EISSN: 1754-2103 識別號： DOI: 10.1155/2015/478062 識別號： PMID: 27018859
显示于类别:	[Departmant of Mechanical Engineering ] journal & Dissertation

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	13	检视/开启

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing

数据加载中.....