摘要： A reducer is now developed towards the trend of customization service and cost-saving. In this study, a sizing program for the reducer has been developed in order to replace the manual sizing process. We aim at the total center distance of the gear reducer for optimization to reduce gear volume and weight. Also, we checked constrains such as, tooth root bending, tooth contact strength, gear shaft endangered cross-section, bearing life, gear shaft deflection, and torsion angle deformation, etc., to obtain reliable drive strength. Comparisons of sizes and weights before and after optimization confirm that the purpose for reducing production cost is achieved. 出版者： Taylor & Francis 出版日期： 2014-01-01 出處： Smart science, 2014-01, Vol.2 (3), p.144-153 資源來源： Airiti Library (AL) 版權： 2014 Taylor and Francis Group, LLC 2014 識別號： ISSN: 2308-0477 識別號： EISSN: 2308-0477 識別號： DOI: 10.1080/23080477.2014.11665618
