Two-dimensional vibration-assisted magnetic abrasive finishing of stainless steel SUS304

NCU Institutional Repository > 工學院 > 機械工程學系 > 期刊論文 > Item 987654321/109104

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://ir.lib.ncu.edu.tw/handle/987654321/109104

题名:	Two-dimensional vibration-assisted magnetic abrasive finishing of stainless steel SUS304
作者:	顏炳華;Lee, Yi-Hsun;Wu, Kun-Ling;Jhou, Jhan-Huang;Tsai, Yung-Hsing;Yan, Biing-Hwa
贡献者:	工學院機械工程學系
关键词:	Abrasive finishing;Abrasives;Austenitic stainless steels;CAE) and Design;Computer-Aided Engineering (CAD;Design of experiments;Engineering;Industrial and Production Engineering;Machining;Mechanical Engineering;Media Management;Original Article;Parameters;Polishing;Rapid prototyping;Stainless steel;Surface properties;Surface roughness;Taguchi methods;Vibration;Workpieces
日期:	2013-12-01
上传时间:	2026-04-23 15:31:57 (UTC+8)
出版者:	Springer London;London: Springer London
摘要:	摘要： Traditional magnetic abrasive finishing (MAF) involves unidirectional polishing of surface but suffers the drawback of forming deep scratches, resulting in poor surface quality. This study attempts to enhance the polishing efficiency of MAF by adding vibration to the platform, focusing on the fabrication of the two-dimensional vibration-assisted MAF (2D VAMAF) setup. Experiments are conducted with variations in parameter levels of 2D VAMAF. Comparison of finished surface results shows superiority of 2D VAMAF in obtaining lower surface roughness and mirror surface quality. In addition, this study uses the Taguchi experimental design method to obtain the optimal parameter combination of 2D VAMAF for surface roughness improvement. The optimal combination obtained includes working gap (1 mm) and weight of SiC, steel particles, and machining fluid (1 g, 1.5 g and 3 g, respectively); frequency of vibration along X and Y directions (16.67 Hz); rotational speed of magnet (500 rpm); and size of SiC and steel particles (8000 and #120, respectively). With 5-min 2D VAMAF under optimal parameter combination, the surface roughness of a stainless steel SUS304 workpiece can be reduced from 0.13 to 0.03 μm, an improvement of 77 %. Experimental results reveal that 2D VAMAF can indeed improve surface quality with a shorter processing time and a smaller amount of abrasives required, both of which contribute to cost reduction. With less pollution incurred, 2D VAMAF is a more environmental friendly machining method in industry. 其他題名： Int J Adv Manuf Technol 出版者： London: Springer London 出版日期： 2013-12-01 出處： International journal of advanced manufacturing technology, 2013-12, Vol.69 (9-12), p.2723-2733 資源來源： EBSCOhost Academic Search Premier 版權： Springer-Verlag London 2013 版權： The International Journal of Advanced Manufacturing Technology is a copyright of Springer, (2013). All Rights Reserved. 識別號： ISSN: 0268-3768 識別號： EISSN: 1433-3015 識別號： DOI: 10.1007/s00170-013-5242-0
显示于类别:	[機械工程學系] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	17	检视/开启

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing

数据加载中.....