中大學術數位典藏-NCU Institutional Repository-提供博碩士論文、考古題、期刊論文、研究計畫等下載:

Collection

	journal & Dissertation [199/199]
	Research Project [1497/1497]
	pass exam [162/162]

Siblings

	Graduate Institute of opto-Mechatronics [523/523]
	Executive Master of Opto-Mechatronics Engineering [2/2]
	Department of Chemical and Materials Engineering [1016/1016]
	National Central University Department of Chemical & Materials Engineering [2774/2774]
	International Environment Sustainable Development Program [96/96]
	Department of Civil Engineering [1184/1184]
	Graduate Institute of Civil Engineering [3429/3429]
	Interdisciplinary Program, College of Engineering [12/12]
	International Master Degree Program in Applied Materials Science(IAMS) [9/9]
	Institute of Materials Science and Engineering [706/706]
	Graduate Institute of Mechanical Engineering [4343/4343]
	Graduate Institute of construction engineering [554/554]
	Graduate Institute of Environmental Engineering [1718/1718]
	Energy of Mechatronics [494/494]
	Executive Master of Civil Engineering [658/658]
	Executive Master of Mechanical Engineering [353/353]
	Executive Master of Construction Engineering and Management [181/181]
	Executive Master of Environmental Engineering [363/363]

Community Statistics

	Item counts issued in 3 years: 124(6.67%)
	Items With Fulltext: 1858(100.00%)
Download counts of the item
	Download times greater than 0: 1858(100.00%)
	Download times greater than 100: 1791(96.39%)
	Total Bitstream Download Counts: 692623(1.39%)

Last Update: 2026-02-18 00:29

Top Upload

Top Download

Recent Submissions

	齒輪產學技術聯盟( I );Industry-Academy Tech...
	臺德氫能合作研究之推動及管理計畫;Promotion and Mana...
	開發具高溫穩定性與抗輻射強化機制之Ti微合金強化型低活化鋼材;Deve...
	創新連續創成內旋刮削螺桿加工法之理論模型及切削實驗建置;Theoret...
	高壓和高溫氨/氫/空氣燃料層流和紊流引燃和燃燒過程之實驗和數值模擬研究...
	高性能變導程雙螺桿壓縮機之轉子動平衡設計及熱流性能計算關鍵技術研發(I...
	航太技術、熱傳學及流體力學學門研究發展及推動規劃計畫( III );R...
	航太技術、熱傳學及流體力學學門研究發展及推動規劃計畫( II );Re...
	具力量交互之手指外骨骼系統應用於虛實整合環境中的遠端操作;Finger...
	使用DS及CCz長晶法開發生長太陽光電產業級的矽晶定;Developm...

Jump to a point in the index:
Or type in a year:

Ordering With Most Recent First

Show Oldest First

Showing items 626-650 of 1858. (75 Page(s) Totally)
<< < 21 22 23 24 25 26 27 28 29 30 > >>
View [10|25|50] records per page

Date	Title	Authors
2015-01-08	中央大學研發成果萌芽功能中心第二期計畫(I)	賴景義
2015-01-08	中高溫除塵技術之研究與發展;Research and development of coal cleanup technology in intermediate/high temperature	蕭述三
2015-01-08	以實驗及離散元素法分析顆粒體受束制壓力及動態衝擊負載之力學行為;Experimental Study and Dem Simulation on Mechanical Response of Granular Solid Subject to Confined Compression and Dynamic Impact	林志光
2015-01-08	加壓型SOFC之前瞻實作研究及其與微氣渦輪機整合發電之模擬評估;Advanced Experimental Study on Pressurized SOFC and Its Integration with Micro Gas Turbines Modelling Assessment for Hybrid Power Generation	施聖洋
2015-01-08	正齒輪之齒輪精度對傳動誤差及動態特性影響之研究;Investigation on the Influences of Gear Precision on Transmission Errors and Dynamic Characteristics of Spur Gears	陳怡呈
2015-01-08	同步組合加載超音波輔助對等通道彎角擠製加工問題效應的研究;An Investigation on the Effect of Combined Ultra-Sonic Vibrations Synchronically Superimposed on Ecae Problem	葉維磬
2015-01-08	利用電化學加工製作螺旋微針之研究;Fabrication of Helical Micro-Pins by Electrochemical Machining	洪勵吾
2015-01-08	具球面漸開線之粉末冶金直齒傘齒輪對齒面修整技術;Flank Modification for Pm Spur Bevel Gear Drives with Spherical Involute Flanks	蔡錫錚
2015-01-08	固態氧化物燃料電池金屬連接板與封裝玻璃陶瓷接合件潛變與熱機疲勞性質研究;Creep and Thermo-Mechanical Fatigue Properties of the Joint between Metallic Interconnect and Glass-Ceramic Sealant in Solid Oxide Fuel Cell (Ii)	林志光
2015-01-08	奈米矽質譜分析晶片新型表面修飾技術開發與應用;Development of Novel Nanostructured Silicon Surface Modification Technique for Mass Spectrometry Analysis	曹嘉文
2015-01-08	負電容用於壓電狀態變換吸振器之結構減振分析;State-Switching Piezoelectric Absorbers with Negative Capacitance for Vibration Reduction of a Structure	黃以玫
2015-01-08	柴氏長晶法生長大尺寸藍寶石單晶之數值模擬研究;Numerical Simulation of Large-Size Sapphire Crystal Growth with Czochralski Method	陳志臣
2015-01-08	深冷鍛造及硬化陽極處理對鋁合金的微結構與機械性質的影響;Influence of Cryoforging and Hard Anodization on Microstructure and Mechanical Properties of Al-Zn-Mg-Cu-Si Alloy	施登士
2015-01-08	提升白光OLED性能之創新元件設計與製程技術研發( I );Development of Novel Device Design and Fabrication Technology for Performance Enhancement of Oled Lighting( I )	何正榮
2015-01-08	微量流動電解液應用於石英玻璃之電化學線放電加工技術研究( I );Wire Electrochemical Discharge Machining (Wecdm) of Quartz Glass with Electrolyte Flow( I )	顏炳華
2015-01-08	照度分布演算法實現高智慧化節能照明系統;Intelligent Lighting Systems by the Illuminance Distribution Algorithm Methods	陳奇夆
2015-01-08	節能主軸中心之推動及管理計畫(I);Project for Promoting and Managing Conservation Focus Center	陳志臣
2015-01-08	實驗，模擬及理論分析探討剪力顆流之流動行為與密度分離機制;Experimental, Simulation and Theoretical Study the Flow Behavior and Density-Driven Segregation in Sheared Granular Flows	廖俊忠
2015-01-08	齊次李雅普諾夫(Lyapunov)模糊系統穩定性分析;SOS-Based Fuzy Stability Analysis via Homogeneous Lyapunve Function	羅吉昌
2015-01-08	模流分析應用之孔洞與混接面特徵辨識技術發展;On the Development of Feature Recognition Algorithms for Holes and Blend Faces for the Applications in Mold Flow Analysis	賴景義
2015-01-08	適應性光學系統應用於航太級輕合金(鋁、鈦合金)之線上即時粗糙度量測系統及低成本液體透鏡整合應用;Application of Adaptive Optics (AO) in Aerospace Light Metals (Aluminum & Titanium Alloys) In-situ Surface Roughness Measurement and Development of Low-Cost AO-Assisted Liquid Lens	傅尹坤
2015-01-08	頸椎手術植釘導引器之複合材料三維列印系統開發;The Development of 3d Printing System with Composite Material for Drill Guide Template on Cervical Vertebra Surgery	廖昭仰
2015-01-08	應用於LED平行光曝光機之二次光學透鏡設計與驗證;Design and Verification of a Secondary Optical Lens Applied for a LED Collimated Exposure Machine	陳奇夆
2015-01-08	顆粒於旋轉滾筒之流動行為研究與分析;Study of the Mechanism and Dynamic Behavior of Granular Flow in Rotating Drum	蕭述三
2015-01-08	疊紋式受抑全反射之多維度位移量測技術研發;Development of Multidimensional Displacement Measurment Technique by Moire-Based Frustrated Total Internal Reflection	李朱育