中大機構典藏-NCU Institutional Repository-提供博碩士論文、考古題、期刊論文、研究計畫等下載:

Collection

	journal & Dissertation [199/199]
	Research Project [1439/1439]
	pass exam [153/153]

Siblings

	Graduate Institute of opto-Mechatronics [514/514]
	Department of Chemical and Materials Engineering [978/978]
	National Central University Department of Chemical & Materials Engineering [2693/2693]
	International Environment Sustainable Development Program [96/96]
	Department of Civil Engineering [1147/1147]
	Graduate Institute of Civil Engineering [3335/3335]
	Interdisciplinary Program, College of Engineering [9/9]
	International Master Degree Program in Applied Materials Science(IAMS) [9/9]
	Institute of Materials Science and Engineering [666/666]
	Graduate Institute of Mechanical Engineering [4191/4191]
	Graduate Institute of construction engineering [542/542]
	Graduate Institute of Environmental Engineering [1664/1664]
	Energy of Mechatronics [470/470]
	Executive Master of Civil Engineering [633/633]
	Executive Master of Mechanical Engineering [336/336]
	Executive Master of Construction Engineering and Management [174/174]
	Executive Master of Environmental Engineering [349/349]

Community Statistics

	Item counts issued in 3 years: 149(8.32%)
	Items With Fulltext: 1791(100.00%)
Download counts of the item
	Download times greater than 0: 1791(100.00%)
	Download times greater than 100: 1598(89.22%)
	Total Bitstream Download Counts: 521046(1.27%)

Last Update: 2024-12-12 17:31

Top Upload

Top Download

Recent Submissions

	雙波長偏振干涉儀之研發與精密量測之應用;Development and...
	應用顆粒阻尼技術于剛架結構減振分析: 雙向耦合離散元素法與有限元素法理...
	應用超音速氣泡流於航太構件之高性能電化學加工研究;Research o...
	應用強化學習於具備多等級多排列模式的Mirco LED巨量轉移技術之研...
	應用可見光通訊、位置指紋和機器學習於工業機器手臂再定位;Applyin...
	複合雷射圖案活化與無電鍍應用於藍寶石晶圓之微加工與金屬化特徵研究;Ch...
	複合階梯式行星齒輪機構之動態受載傳動效能 -- 基本分析模型建立與嚙合...
	數學學門重點計畫:基於隨機狀態相關Riccati方程衝擊角引導的3D目...
	電化學製備微梨形碳化鎢電極結合電化學放電加工藍寶石基板之研究;Rese...
	解析高熵合金之高溫應力-應變行為與熱加工參數之建立( II );Ana...

Jump to a point in the index:
Or type in a year:

Ordering With Most Recent First

Show Oldest First

Showing items 851-875 of 1791. (72 Page(s) Totally)
<< < 30 31 32 33 34 35 36 37 38 39 > >>
View [10|25|50] records per page

Date	Title	Authors
2011	Constituted oxides/nitrides on nitriding 304, 430 and 17-4 PH stainless steel in salt baths over the temperature range 723 to 923 K	Shih,TS; Huang,YS; Chen,CF
2011	Contact stress analysis of concave conical involute gear pairs with non-parallel axes	Chen,YC; Liu,CC
2011	Design and Fabrication of Fresnel Lens and ZnO Thin-Film Transducer	Pan,MC; Bui,TA; Nien,YC; Shih,WC
2011	Design of model-based unbalance compensator with fuzzy gain tuning mechanism for an active magnetic bearing system	Tung,PC; Tsai,MT; Chen,KY; Fan,YH; Chou,FC
2011	Development of a Mini Liquid Cooling System for High-Heat-Flux Electronic Devices	Yang,CY; Liu,WC
2011	Development of a ride comfort evaluation method with a laboratory testing system	Lin,KY; Hwang,JR; Chang,JM; Doong,JL
2011	Dry Sliding Wear Properties of Ultra-high Molecular Weight Polyethylene Parts Made by the Injection Molding Process	Kuo,HC; Jeng,MC
2011	Dynamic strain aging in low cycle fatigue of duplex titanium alloys	Lin,YH; Hu,KH; Kao,FH; Wang,SH; Yang,JR; Lin,CK
2011	Effect of Mn, Ti/Cr ratio, and heat treatment on hydrogen storage properties of TI-V-CR-MN alloys	Jeng,RR; Chou,CY; Lee,SL; Wu,YC; Bor,HY
2011	Effect of rare earth elements addition on microstructures and mechanical properties of A356 alloy	Tsai,YC; Chou,CY; Jeng,RR; Lee,SL; Lin,CK
2011	Effect of Solvent on the Morphology of Nickel Localized Electrochemical Deposition	Chen,YS; Lin,JC; Lin,ZH; Li,C; Chang,JK
2011	Effect of trace Ce addition on the microstructures and mechanical properties of A356 (AL-7SI-0.35 Mg) aluminum alloys	Tsai,YC; Lee,SL; Lin,CK
2011	Effect of Voltage Supply Mode on Electrolytic Machining of Polycrystalline Silicon	Yu,PH; Wu,KL; Lee,SM; Yan,BH
2011	Effects of bias on properties of Ti-C:H films coated by filtered cathodic vacuum arc	Lee,S; Chu,CL; Gwo,J; Huang,JJ; Tsai,MJ; Wang,SM
2011	Effects of cyclic hydriding-dehydriding reactions of Mg(2)Ni alloy on the expansion deformation of a metal hydride storage vessel	Lin,CK; Huang,SM; Jhang,YH
2011	Effects of loading adjustment on the reliability degradation of composites	Chen,CL; Wang,KS
2011	Effects of post-annealing on the structural and nanomechanical properties of Ga-doped ZnO thin films deposited on glass substrate by rf-magnetron sputtering	Wang,SK; Lin,TC; Jian,SR; Juang,JY; Jang,JSC; Tseng,JY
2011	Effects of the furnace pressure on oxygen and silicon oxide distributions during the growth of multicrystalline silicon ingots by the directional solidification process	Teng,YY; Chen,JC; Lu,CW; Chen,HI; Hsu,C; Chen,CY
2011	Effects of the hydrogen content on the development of anodic aluminum oxide film on pure aluminum	Shih,TS; Chen,PC; Huang,YS
2011	Efficient Segmentation Algorithm for 3D Bone Models Construction on Medical Images	Huang,CY; Luo,LJ; Lee,PY; Lai,JY; Wang,WT; Lin,SC
2010-12-01	反射式聚光系統光機設計; Opto-Mechanical Design of Reflective Photovoltaic Concentrator Systems	陳怡呈
2010-12-01	低氮氧化物燃燒器與無碳氫燃燒器之研發(II); R & D on Low Nox Burner and Non-Carbon Hydrogen Burner (II)	施聖洋
2010-12-01	微機電整合技術製作毫米波感測元件暨系統; Integrated Manufacturing for Millimeter-Wave Sensing Systems	傅尹坤
2010-12-01	SOFC電池堆結構耐久性研究與壽命評估（III）; Life Assessment and Structural Durability Analysis for SOFC Stacks (III)	林志光
2010-12-01	科學紮根活動－-桃園縣「親子科學廣場」推廣; Popularization of Community Science Activity in Taoyuan County	蕭述三