中大機構典藏-NCU Institutional Repository-提供博碩士論文、考古題、期刊論文、研究計畫等下載:

Collection

	journal & Dissertation [199/199]
	Research Project [1439/1439]
	pass exam [153/153]

Siblings

	Graduate Institute of opto-Mechatronics [514/514]
	Department of Chemical and Materials Engineering [978/978]
	National Central University Department of Chemical & Materials Engineering [2693/2693]
	International Environment Sustainable Development Program [96/96]
	Department of Civil Engineering [1147/1147]
	Graduate Institute of Civil Engineering [3335/3335]
	Interdisciplinary Program, College of Engineering [9/9]
	International Master Degree Program in Applied Materials Science(IAMS) [9/9]
	Institute of Materials Science and Engineering [666/666]
	Graduate Institute of Mechanical Engineering [4191/4191]
	Graduate Institute of construction engineering [542/542]
	Graduate Institute of Environmental Engineering [1664/1664]
	Energy of Mechatronics [470/470]
	Executive Master of Civil Engineering [633/633]
	Executive Master of Mechanical Engineering [336/336]
	Executive Master of Construction Engineering and Management [174/174]
	Executive Master of Environmental Engineering [349/349]

Community Statistics

	Item counts issued in 3 years: 149(8.32%)
	Items With Fulltext: 1791(100.00%)
Download counts of the item
	Download times greater than 0: 1791(100.00%)
	Download times greater than 100: 1598(89.22%)
	Total Bitstream Download Counts: 520807(1.27%)

Last Update: 2024-12-12 04:50

Top Upload

Top Download

Recent Submissions

	雙波長偏振干涉儀之研發與精密量測之應用;Development and...
	應用顆粒阻尼技術于剛架結構減振分析: 雙向耦合離散元素法與有限元素法理...
	應用超音速氣泡流於航太構件之高性能電化學加工研究;Research o...
	應用強化學習於具備多等級多排列模式的Mirco LED巨量轉移技術之研...
	應用可見光通訊、位置指紋和機器學習於工業機器手臂再定位;Applyin...
	複合雷射圖案活化與無電鍍應用於藍寶石晶圓之微加工與金屬化特徵研究;Ch...
	複合階梯式行星齒輪機構之動態受載傳動效能 -- 基本分析模型建立與嚙合...
	數學學門重點計畫:基於隨機狀態相關Riccati方程衝擊角引導的3D目...
	電化學製備微梨形碳化鎢電極結合電化學放電加工藍寶石基板之研究;Rese...
	解析高熵合金之高溫應力-應變行為與熱加工參數之建立( II );Ana...

Jump to a point in the index:
Or type in a year:

Ordering With Most Recent First

Show Oldest First

Showing items 1576-1600 of 1791. (72 Page(s) Totally)
<< < 59 60 61 62 63 64 65 66 67 68 > >>
View [10|25|50] records per page

Date	Title	Authors
2000-12-01	火箭發射噪音消除器之研究與設計(II)	潘敏俊
2000-12-01	析出硬化型汽機葉片不銹鋼腐蝕疲勞性質研究(III); Research on the Corrosion Fatigue Properties of Precipitation-Hardened(III)	林志光
2000-12-01	超塑性鋁合金快速成形研究(II)	李雄
2000-12-01	新式燃煤發電技術高溫氣體流動式顆粒床過濾器冷性能測試(II); Cold Performance Test of Moving Granular Bed Filter for Hot-Gas Cleanup of Advanced Coal-Fired Power(II)	蕭述三
2000-12-01	溫度循環及溫變率大小對於電子產品之破壞效應評估(II); Effect of the Thermal Cycling and Heating Rate on the Failure of Electronic Products(II)	黃俊仁
2000-10-01	非線性光折變材料生長及其應用技術之研究---子計畫I：光折變晶纖生長及特性增強之研究(III); Growth and Improvement Photorefractive Effect of Single Crystal Fibers(III)	陳志臣
2000-09-01	光束擾動的適應性控制研究(II);Adaptive Control of Photon Beam Fluctuation at the SRRC(II)	陳顯禎; 王端正
2000-07-01	三維鍛粗加工之變分上界限解; Variational Upper-Bound of 3 Dimensional Upset Forging	葉維磬
2000-07-01	小型酒精熱水器之研發-小型酒精熱水器之研發(I); Research and Development of Miniature Ethanol Water Heater(I)	周復初; 程曜
2000-07-01	不同環境下之沃斯回火球墨鑄鐵疲勞裂縫成長行為; Fatigue Crack Growth of Austempered Ductile Irons in Various Environments	林志光
2000-07-01	多孔性介質爐中熱增強燃燒現象之研究(II); Thermally Enhanced Combustion in Porous Medium Burners (II)	曾重仁
2000-07-01	自走式自動檢測及電焊機械臂之研發---子計畫III：自走式自動機械臂之應用-影像視覺系統回饋判斷與焊道路徑偵測之研發; Development of Image Feedback System for Welding Robots	黃衍任
2000-07-01	利用微細放電及超音波振動研磨製作精密微孔之技術研發; Fabrication of Precision Micro-Hole Using Micro EDMing and Ultrasonic Vibration Lapping	顏炳華
2000-07-01	固液擴散接合法製作耐溫微接點研究---子計畫IV：固液擴散接合厚膜耐溫微接點研究(III); On the Solid-Liquid Interdiffusion Bonding of Conductive Ag-Containing Thick Films (III)	林景崎
2000-07-01	金屬粉末射出成型胚體之二維毛細吸附脫脂數值模擬與實驗觀測; The Numerical Simulation and Experimental Visualization of Two Dimensional Wick Debinding in MIM's Compacts	洪勵吾
2000-07-01	扁平管平行流空調機之研製(III); Development of Parallel Flow Air Conditioner (III)	楊建裕
2000-07-01	射出成型智慧型製程控制系統開發之研究; The Development of Integrated Process Control System in Injection Molding	鄭銘章
2000-07-01	氣態預混火焰紊流燃燒速度之實驗研究(III); Experimental Studies of Turbulent Burning Velocities for Gaseous Premixed Flames (III)	施聖洋
2000-07-01	消失模造模時保麗龍模飄移與變型的研究; Study on the Drifting and Distortion of Foam Pattern in the Lost Foam Pocess	施登士
2000-07-01	高溫廢氣淨化流動式顆粒床過濾技術研究與開發---子計畫I：染塵濾材於過濾器中之運動行為觀察研究(II); Experimental Study of Filter Granules with Dust Particles Flowing in the a Moving Granular Bed Flue Gas Cleanup Filters (II)	蕭述三
2000-07-01	高難度、高附加價值擠製鋁合金之合金設計與製程研究(II); The Research of Alloy Composition Design and Manufacture Process for High Difficulty, High Additive Value Extrusion Aluminum Alloys（II）	歐炳隆
2000-07-01	從妥善率觀點架構系統操作管理及同步工程作業(I); Planning Operation Management and Concurrent Engineering Activities of Systems Based on System Availability (I)	王國雄
2000-07-01	渦輪葉片原型之CAD模型重建與五軸加工複製技術發展; (I) CAD Model Reconstruction and 5-Axis NC Reproduction for Turbine Blade Prototypes (I)	賴景義
2000-07-01	發電機葉片逆向工程技術發展; On the Development of Reverse Engineering Technology for the Blades of Turbomachinery	賴景義
2000-07-01	短玻璃纖維強化聚碳酸酯複合材料機械性質研究; Study on the Mechanical Properties of Polycarbonate Composites Reinforced with Short Glass Fibers	黃俊仁; 董基良