Dynamic analysis of a rotating beam subjected to repeating axial and transverse forces for simulating a lathing process

NCU Institutional Repository > 工學院 > 機械工程研究所 > 期刊論文 > Item 987654321/26851

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/26851

题名:	Dynamic analysis of a rotating beam subjected to repeating axial and transverse forces for simulating a lathing process
作者:	Huang,YM;Yang,ML
贡献者:	機械工程研究所
关键词:	DEFLECTION DEPENDENT LOAD;SHAFT SUBJECT;MOVING LOAD;RESONANCE;STABILITY
日期:	2009
上传时间:	2010-06-29 18:01:42 (UTC+8)
出版者:	中央大學
摘要:	The dynamics of the workpiece of a lathe is simulated in the presented paper. A rotating Rayleigh beam is chosen as a simple model of the workpiece. The beam or the workpiece is subjected to forces front the cutting tool of the lathe. The external forces, in transverse and axial directions, are traveling in a repeating or periodic motion. The force in the axial direction is a large cutting force resulting in Coupled bending deformation while forces in the transverse directions are the contacting forces. In this paper, the governing equations of the rotating Rayleigh beam are derived by Hamilton's principle. The external, periodic forces resulted from the tool are expressed in Fourier series. Galerkin's method is then chosen for disceretizing the partial differential equations. The instability regions of the responses are determined by using the method of multiple scales and the Floquet theory. Fast Fourier transform gives the frequency domain responses for examining the dynamic characteristics. The numerical results are discussed. Parametric Studies are also performed. (C) 2009 Elsevier Ltd. All rights reserved.
關聯:	INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
显示于类别:	[機械工程研究所] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	385	检视/开启

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing

数据加载中.....