中大機構典藏-NCU Institutional Repository-提供博碩士論文、考古題、期刊論文、研究計畫等下載:Item 987654321/26871
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 78852/78852 (100%)
造访人次 : 37793308      在线人数 : 690
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜寻范围 查询小技巧:
  • 您可在西文检索词汇前后加上"双引号",以获取较精准的检索结果
  • 若欲以作者姓名搜寻,建议至进阶搜寻限定作者字段,可获得较完整数据
  • 进阶搜寻


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/26871


    题名: Localized Ni deposition improved by saccharin sodium in the intermittent MAGE process
    作者: Yang,JH;Lin,JC;Chang,TK;You,XB;Jiang,SB
    贡献者: 機械工程研究所
    关键词: ELECTROCHEMICAL DEPOSITION;MICROFABRICATION;MICROSTRUCTURES;FABRICATION;COLUMNS
    日期: 2009
    上传时间: 2010-06-29 18:02:08 (UTC+8)
    出版者: 中央大學
    摘要: Localized Ni deposition improved by saccharin sodium (SS) in the intermittent microanode guided electroplating (intermittent MAGE) process has been investigated. This effect is more complicated than conventional planar electroplating. If there was an insignificant amount of SS in the bath (i. e. less than 1.0 mM), then the radius of the fabricated nodular columns would range from 37.5 to 42.5 mu m cyclically along the axis and the surface would be covered with a homogeneous layer of 3-8 mu m Ni particles. In the presence of an optimal amount of SS (i. e. around 1.0-3.0 mM), columns with uniform radius (around 42.5 mu m) were fabricated and the surface was covered by a homogeneous layer of fine Ni particles (i. e. diameter 1 mu m). With higher SS (4.0-6.0 mM in the bath), columns were constructed with uniform radius but the surface was covered by alternating zones of coarse and fine Ni particles. For SS beyond critical concentrations (8.0 mM at 4.0 V and 10.0 mM at 4.5 and 5.0 V), no microcolumn could be constructed and a universal planar Ni deposition on the substrate was formed instead. SS is an absorbent and it leads to cathodic polarization in the electroplating process. The influence of SS on the asymmetrical electric field distributed in the local area and formed by localized electrochemical deposition (LECD) has been studied by the use of the proposed model in this work and commercial finite element software.
    關聯: JOURNAL OF MICROMECHANICS AND MICROENGINEERING
    显示于类别:[機械工程研究所] 期刊論文

    文件中的档案:

    档案 描述 大小格式浏览次数
    index.html0KbHTML472检视/开启


    在NCUIR中所有的数据项都受到原著作权保护.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明