The analysis and investigation on the microelectrode fabrication by electrochemical machining

NCUIR > Engineering College > Graduate Institute of Mechanical Engineering > journal & Dissertation > Item 987654321/26896

Please use this identifier to cite or link to this item: http://ir.lib.ncu.edu.tw/handle/987654321/26896

Title:	The analysis and investigation on the microelectrode fabrication by electrochemical machining
Authors:	Fan,ZW;Hourng,LW
Contributors:	機械工程研究所
Keywords:	N/A
Date:	2009
Issue Date:	2010-06-29 18:02:43 (UTC+8)
Publisher:	中央大學
Abstract:	Electrochemical machining (ECM), also called the electrolysis machining, has become more and more important in micro-machining in recent years. In this paper, a 510 mu m tungsten rod was used as the anode, and nickel plates were used as the cathode to fabricate the micro-pin used in scanning tunneling microscope (STM) by electrochemical polishing. Different from the needle shape in STM, a cylindrical shape of microelectrode is desired for the application in electrochemical drilling. The influence of working parameters on the electrode shape is investigated. Experimental results show that low applied voltage, high concentration electrolyte and an appropriate rotation of electrode are preferred to fabricate microelectrodes with diameter less than 100 mu m. A higher rotational speed may result in an electrode of conical shape. (C) 2009 Elsevier Ltd. All rights reserved.
Relation:	INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
Appears in Collections:	[Graduate Institute of Mechanical Engineering] journal & Dissertation

Files in This Item:

File	Description	Size	Format
index.html		0Kb	HTML	488	View/Open

社群 sharing