English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 78936/78937 (100%)
造訪人次 : 39788976      線上人數 : 685
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋


    請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/26899


    題名: The Effect of Ultrasonic Treatment on Microstructural and Mechanical Properties of Cast Magnesium Alloys
    作者: Chen,YJ;Hsu,WN;Shih,JR
    貢獻者: 機械工程研究所
    關鍵詞: ACOUSTIC CAVITATION SERIES;ALUMINUM A356 ALLOY;OXIDE-FILMS;SONOCHEMISTRY;SOLIDIFICATION;VIBRATION;PROSPECTS
    日期: 2009
    上傳時間: 2010-06-29 18:02:47 (UTC+8)
    出版者: 中央大學
    摘要: Magnesium alloys are important light metals. In recent years, they have been widely applied in the aerospace and automotive industries, and in the manufacture of communication devices, consumer-electronics appliances and computer products. However, cast magnesium and magnesium alloys are subject to problems due to gas pores, inclusion particles, oxide films, and so on. How to reduce the harm caused by these defects and refine the structure to improve casting quality has become an important topic. In this study, we evaluate the effect on casting quality of an ultrasonic method for treating the melt. The method is based on the generation of cavitation bubbles from ultrasonic treatment of the melt, which induces dispersion and degassing action. Analysis of the microstructure and determination of the mechanical properties of the resultant castings are the basis for identifying the quality of the magnesium and magnesium alloys. The microstructure was evaluated using an optical microscope and scanning electron microscopy (SEM). The elemental constituents of the inclusion particles and oxide films were identified using scanning electron microscopy in conjunction with an X-ray energy dispersive spectrometer and electron probe microanalyzer (EPMA). Finally, the mechanical properties of the magnesium and magnesium alloys, including the tensile strength, the elongation and the hardness, were also determined and discussed. In addition, variations in mechanical properties of cast aluminum and magnesium alloys by ultrasonic treatment are also discussed. [doi:10.2320/matertrans.MER2008273]
    關聯: MATERIALS TRANSACTIONS
    顯示於類別:[機械工程研究所] 期刊論文

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    index.html0KbHTML313檢視/開啟


    在NCUIR中所有的資料項目都受到原著作權保護.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明