Influence of kerosene and distilled water as dielectrics on the electric discharge machining characteristics of Ti-6Al-4V

NCU Institutional Repository > 工學院 > 機械工程研究所 > 期刊論文 > Item 987654321/26924

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/26924

题名:	Influence of kerosene and distilled water as dielectrics on the electric discharge machining characteristics of Ti-6Al-4V
作者:	Chen,SL;Yan,BH;Huang,FY
贡献者:	機械工程研究所
关键词:	N/A
日期:	1999
上传时间:	2010-06-29 18:03:23 (UTC+8)
出版者:	中央大學
摘要:	In electrical discharge machining (EDM), a process utilizing the removal phenomenon of electrical discharge in dielectric, the working fluid plays an important role affecting the material removal rate and the properties of the machined surface. In this paper the machining characteristics of Ti-6Al-4V were investigated with kerosene and distilled water as the dielectrics. The results show that the material removal rate is greater and the relative electrode wear ratio is lower, when machining in distilled water rather than in kerosene. By using X-ray diffraction, it is confirmed that carbide (TIC) and oxide (TiO) are formed on the workpiece surface when using kerosene and distilled water, respectively. The lower removal rate when machining Ti-6Al-4V ahoy in kerosene can be explained by both the formation of TiC, which has a higher melting temperature and therefore requires a larger discharge energy, and carbon deposition on the electrode, causing further retardation of the discharge process. A larger amount of debris and more micro cracks are also found when using distilled water as the dielectric. (C) 1999 Elsevier Science S.A. All rights reserved.
關聯:	JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
显示于类别:	[機械工程研究所] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	391	检视/开启

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing

数据加载中.....