Study on void formation in resin transfer molding

NCU Institutional Repository > 工學院 > 機械工程研究所 > 期刊論文 > Item 987654321/26976

請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/26976

題名:	Study on void formation in resin transfer molding
作者:	Chang,CY;Hourng,LW
貢獻者:	機械工程研究所
關鍵詞:	IMPREGNATION;COMPOSITES;RTM;VARIABLES;REMOVAL
日期:	1998
上傳時間:	2010-06-29 18:04:38 (UTC+8)
出版者:	中央大學
摘要:	A 2-D model has been developed for the transverse impregnation of a resin into a unidirectional packed fiber mat. The model takes into account two types of flow, macro-flaw around the fiber bundles and micro-now around the fibers in the bundles, which occur simultaneously. Both flows are described by Darcy's law. Results show that if the ratio of permeability of the macro-now to the micro-flow is more than 20, an elliptic type void is formed within the fiber bundle, and the void will shrink and disappear if vacuum assistance is applied in the mold. The capillary effect was also investigated by use of a numerical simulation based on a body-fitted finite element method and by experiment. A correlation between the capillary force and other parameters is proposed for the XT-D/O unidirectional fiber mat. The quasi-equilibrium capillary effect is limited to when the modified capillary number is about O(10(-4)).
關聯:	POLYMER ENGINEERING AND SCIENCE
顯示於類別:	[機械工程研究所] 期刊論文

文件中的檔案:

檔案	描述	大小	格式	瀏覽次數
index.html		0Kb	HTML	469	檢視/開啟

在NCUIR中所有的資料項目都受到原著作權保護.

社群 sharing