中大機構典藏-NCU Institutional Repository-提供博碩士論文、考古題、期刊論文、研究計畫等下載:Item 987654321/26997
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 78852/78852 (100%)
造访人次 : 37983727      在线人数 : 670
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜寻范围 查询小技巧:
  • 您可在西文检索词汇前后加上"双引号",以获取较精准的检索结果
  • 若欲以作者姓名搜寻,建议至进阶搜寻限定作者字段,可获得较完整数据
  • 进阶搜寻


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/26997


    题名: Impact fatigue of short glass fiber reinforced polycarbonate
    作者: Ho,KC;Hwang,JR;Doong,JL
    贡献者: 機械工程研究所
    关键词: POLYPROPYLENE COMPOSITES;POLYMER COMPOSITES;FRACTURE-TOUGHNESS;RESIDUAL-STRESSES;BEHAVIOR;ORIENTATION;MORPHOLOGY;FAILURE
    日期: 1997
    上传时间: 2010-06-29 18:05:09 (UTC+8)
    出版者: 中央大學
    摘要: The present study analyzes the impact properties of polycarbonate reinforced with 0, 20 and 30 wt% short glass fiber. The specimens were prepared under various injection molding conditions, such as filling time, melting temperature and mold temperature. Impact tests were performed with a Dynatup drop weight impact tester at different impact energies (1.2, 0.16, 0.12 and 0.095 J). The fracture mechanism was examined with a scanning electron microscopy. The results indicated that the specimen reinforced with 30 wt% short glass fiber showed the highest impact energy absorbed, together with the highest impact load in single impact. The absorbed energy of 30 wt% reinforced is approximately 15% higher than that of 20 wt% reinforced and about 10 times higher than that of unreinforced polycarbonate. The polycarbonate with 30 wt% short glass fiber reinforced has the highest impact number and accumulation energy in repeated impacts. The accumulation energy is approximately 15% higher than that of 20 wt% reinforced polycarbonate. The thicker the skin layer, the stronger the interfacial adhesion. The ranking of impact number and accumulation energy is in goad agreement with the distributions of the skin layer thickness in repeated impacts. The splits and tearing mechanisms dominate the single impact fracture in unreinforced polycarbonate, while the fiber pull-out and fiber breakage are the major fracture mechanisms in repeated impacts for polycarbonate composites.
    關聯: JOURNAL OF REINFORCED PLASTICS AND COMPOSITES
    显示于类别:[機械工程研究所] 期刊論文

    文件中的档案:

    档案 描述 大小格式浏览次数
    index.html0KbHTML434检视/开启


    在NCUIR中所有的数据项都受到原著作权保护.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明