Numerical study on the capillary effect of resin transfer molding

NCU Institutional Repository > 工學院 > 機械工程研究所 > 期刊論文 > Item 987654321/27003

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/27003

题名:	Numerical study on the capillary effect of resin transfer molding
作者:	Chang,CY;Hourng,LW;Wu,CJ
贡献者:	機械工程研究所
关键词:	VOID FORMATION;IMPREGNATION
日期:	1997
上传时间:	2010-06-29 18:05:18 (UTC+8)
出版者:	中央大學
摘要:	A model for the impregnation of resin into a unidirectional packed fiber mats by the dynamics of capillary penetration is developed at a low flow rate where resin flow is parallel to fiber axis. The model takes into account two types of flow, the macroflow around the fiber bundles and the microflow around the fibers in the bundles, occurring simultaneously. Both follows are described by Darcy's law. The large difference in the position of flow front between these two types of flow leads to the potential of void formation in resin transfer molding. The capillary force is considered along the flow front. It can be evaluated as a function of liquid contact angle, interfacial tension, the porosity, and the velocity of flow front. The simulation is based on the body-fitted finite element method. Result shows that the void formation is affected not only by the properties of fiber mars, but also by the injection condition. And the capillary effect is limited as the capillary number is less than 0(10(-2)).
關聯:	JOURNAL OF REINFORCED PLASTICS AND COMPOSITES
显示于类别:	[機械工程研究所] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	458	检视/开启

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing