Fatigue crack growth in laser weldments of a cold rolled steel

NCU Institutional Repository > 工學院 > 機械工程研究所 > 期刊論文 > Item 987654321/27039

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/27039

题名:	Fatigue crack growth in laser weldments of a cold rolled steel
作者:	Hwang,JR;Doong,JL;Chen,CC
贡献者:	機械工程學系
关键词:	AISI 4130 STEEL
日期:	1996
上传时间:	2010-06-29 18:06:12 (UTC+8)
出版者:	中央大學
摘要:	This paper describes the effect of laser welding process on the fatigue crack propagation in SPCC-CQ1 cold rolled steel. The influences of weld speed and gap width of butt joint on fatigue crack growth rate are considered. Strength of the weld joints is evaluated by a tensile Lest, while fatigue properties are investigated by fatigue crack propagation test based on linear elastic fracture mechanics. From the results, the added wire filler material had positive effect on the fatigue properties. Increasing welding speed or gap width will improve the resistance to fatigue crack growth because of fast cooling rate and refined equiaxed microstructure in fusion zone. Also, the fatigue crack growth rate of fusion zone and heat affected zone are lower than that of base metal. Transgranular fracture is the typical fracture mechanism and many secondary cracks appear in the fusion zone.
關聯:	MATERIALS TRANSACTIONS JIM
显示于类别:	[機械工程研究所] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	638	检视/开启

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing