EFFECTS OF BE AND FE CONTENT ON PLANE-STRAIN FRACTURE-TOUGHNESS IN A357 ALLOYS

NCU Institutional Repository > 工學院 > 機械工程研究所 > 期刊論文 > Item 987654321/27067

請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/27067

題名:	EFFECTS OF BE AND FE CONTENT ON PLANE-STRAIN FRACTURE-TOUGHNESS IN A357 ALLOYS
作者:	TAN,YH;LEE,SL;LIN,YL
貢獻者:	機械工程學系
關鍵詞:	N/A
日期:	1995
上傳時間:	2010-06-29 18:06:53 (UTC+8)
出版者:	中央大學
摘要:	The effect of Be and Fe content on the plane strain fracture toughness K-IC of aluminum-based A357 alloys is investigated. The fracture behavior of A357 alloys has been evaluated as a function of both the magnitude and morphology of iron-bearing compounds and silicon particles. Addition of Be is beneficial for tensile properties and fracture toughness in the case of alloys containing intermediate (0.07 pet) and higher (0.15 pet) Fe levels. On the other hand, Be added to alloys containing the lower Fe (0.01 pet) level appears detrimental to tensile strength, but the quality index, notch-yield ratio (NYR), and plane strain fracture toughness were improved. Fractographic analysis reveals that crack extension of A357 alloys occurs mainly in an intergranular fracture mode. The fracture processes are initiated by void nucleation at iron-bearing compounds or irregularly shaped eutectic silicon particles as a result of their cracking and decohesion from the matrix. Then, void growth and coalescence result in growth of the main crack by shear-linkage-induced breakdown of submicron-strengthening particles. The effect of Be on increasing K-IC is more apparent in the higher Fe alloys than in the lower Fe alloys. Superior toughness obtained by microstructural control has also been achieved in the intermediate and higher Fe levels of Be-containing alloys, with values equal to those obtained in alloys of lower Fe content.
關聯:	METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
顯示於類別:	[機械工程研究所] 期刊論文

文件中的檔案:

檔案	描述	大小	格式	瀏覽次數
index.html		0Kb	HTML	505	檢視/開啟

在NCUIR中所有的資料項目都受到原著作權保護.

社群 sharing

資料載入中.....