APPLICATION OF FUZZY CONTROL TO AN INSERTING OPERATION

NCU Institutional Repository > 工學院 > 機械工程研究所 > 期刊論文 > Item 987654321/27092

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/27092

题名:	APPLICATION OF FUZZY CONTROL TO AN INSERTING OPERATION
作者:	TUNG,PC;HSU,YP
贡献者:	機械工程學系
关键词:	N/A
日期:	1994
上传时间:	2010-06-29 18:07:31 (UTC+8)
出版者:	中央大學
摘要:	Because of the difficulty of dynamic equations for the inserting operation and the advantage of fuzzy control for easy execution without knowledge of the mathematical models. We used the force feedback signal measured by a force sensor and a fuzzy controller to regulate the position of the peg. The control strategies include two control loops; in one a PID position controller move the peg vague position near to the hole, and in the other the fuzzy controller regulates the final position according to contact force. Between the two control loops we use an index to activate a switch. To verify the proposed control strategy, we performed experiments with a Cartesian manipulator system driven by AC servo-motors. The experimental results reveal that we can insert a peg into a hole with a fitting clearance less than 0.01 mm.
關聯:	FUZZY SETS AND SYSTEMS
显示于类别:	[機械工程研究所] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	414	检视/开启

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing