Converting methane by using an RF plasma reactor

NCUIR > Engineering College > Graduate Institute of Environmental Engineering > journal & Dissertation > Item 987654321/27254

Please use this identifier to cite or link to this item: http://ir.lib.ncu.edu.tw/handle/987654321/27254

Title:	Converting methane by using an RF plasma reactor
Authors:	Hsieh,LT;Lee,WJ;Chen,CY;Chang,MB;Chang,HC
Contributors:	環境工程研究所
Keywords:	SURFACE-WAVE PLASMA;FUEL-LEAN FLAMES;OXIDATIVE PYROLYSIS;RADIOFREQUENCY PLASMA;HIGHER HYDROCARBONS;CHEMICAL STRUCTURES;NI CATALYSTS;DECOMPOSITION;OXYGEN;CONVERSION
Date:	1998
Issue Date:	2010-06-29 18:21:18 (UTC+8)
Publisher:	中央大學
Abstract:	A radio-frequency (RF) plasma system was used to convert methane gas. The reactants and final products were analyzed by using an FTIR (Fourier transform infrared spectrometer). The effects of plasma operational parameters, including feeding concentration (C) of CH4, operational pressure (P) in the RF plasma reactor, total gas flow rate (Q) and input power wattage (W) for CH4 decomposition were evaluated The results showed that the CH4 decomposition fraction increases with increasing power input, decreasing operational pressure in the RF plasma reactor, decreasing CH4 feeding concentration, and decreasing total gas flow rate. In addition, mathematical models based on the obtained experimental data were developed and tested by means of sensitivity analysis.
Relation:	PLASMA CHEMISTRY AND PLASMA PROCESSING
Appears in Collections:	[Graduate Institute of Environmental Engineering ] journal & Dissertation

Files in This Item:

File	Description	Size	Format
index.html		0Kb	HTML	619	View/Open

社群 sharing