中大機構典藏-NCU Institutional Repository-提供博碩士論文、考古題、期刊論文、研究計畫等下載:

Collection

	Electronic Thesis & Dissertation [2899/2899]
	journal & Dissertation [897/897]
	retired tests [328/328]
	Research Project [67/67]

Siblings

	Graduate Institute of opto-Mechatronics [514/514]
	Department of Chemical and Materials Engineering [978/978]
	National Central University Department of Chemical & Materials Engineering [2693/2693]
	International Environment Sustainable Development Program [96/96]
	Department of Civil Engineering [1147/1147]
	Graduate Institute of Civil Engineering [3335/3335]
	Interdisciplinary Program, College of Engineering [9/9]
	International Master Degree Program in Applied Materials Science(IAMS) [9/9]
	Institute of Materials Science and Engineering [666/666]
	Departmant of Mechanical Engineering [1791/1791]
	Graduate Institute of construction engineering [542/542]
	Graduate Institute of Environmental Engineering [1664/1664]
	Energy of Mechatronics [470/470]
	Executive Master of Civil Engineering [633/633]
	Executive Master of Mechanical Engineering [336/336]
	Executive Master of Construction Engineering and Management [174/174]
	Executive Master of Environmental Engineering [349/349]

Community Statistics

	Item counts issued in 3 years: 352(8.40%)
	Items With Fulltext: 4191(100.00%)
Download counts of the item
	Download times greater than 0: 4191(100.00%)
	Download times greater than 100: 3700(88.28%)
	Total Bitstream Download Counts: 2043305(5.04%)

Last Update: 2024-11-27 02:22

Top Upload

Top Download

Recent Submissions

	一種簡易旋轉式LED曝光裝置的設計與實作
	噴嘴外形對超音波輔助噴水效應之探討;Research on the E...
	磁場輔助電化學加工法於不銹鋼陣列微孔拋光之研究;Research on...
	微細片狀電極結合超音波輔助電化學放電加工於石英玻璃加工微槽之研究;In...
	陰離子交換膜水電解單元之傳輸現象分析;Analysis of tran...
	鎳鈦記憶合金電極應用於不鏽鋼彎管內表面電化學拋光之研究;Researc...
	混氣放電線切割加工 N-Type 單晶碳化矽之研究;Research ...
	液體輔助超短脈衝雷射薄石英晶圓微鑽孔研究;Research on Li...
	以超短脈衝雷射內部刻畫技術實現高品質裂面和高效石英晶圓切割探討;Exp...
	基於聚焦成形技術之藍寶石玻璃孔洞自動化量測系統開發;Developme...

Jump to a point in the index:
Or type in a year:

Ordering With Most Recent First

Show Oldest First

Showing items 2001-2025 of 4191. (168 Page(s) Totally)
<< < 76 77 78 79 80 81 82 83 84 85 > >>
View [10|25|50] records per page

Date	Title	Authors
2008-07-14	粉末冶金齒輪齒根疲勞強度之研究	王婉茹; Wan-ju Wang
2008-07-10	具反剋機制系統的隨機過程初步探討	施養奇; Yan-chi Shih
2008-07-10	失效率與失效機率函數間關係之探討	陳鴻銘; Hong-Ming Chen
2008-07-10	失效率函數與可靠度呈等差或等比及混合型關係之探討	劉偉彥; Wei-yen Liu
2008-07-10	高雷諾數低NOx預混弱漩渦噴流燃燒器：紊焰碎形特性定量量測; High-Reynolds-Number Low NOx Premixed Weak-Swirl Jet Burners: Quantitative Measurements of Fractal Characteristics for Turbulent Flames.	楊政憲; Cheng-hsien Yang
2008-07-10	火花引燃機制與散佈狀燃燒型態之實驗研究; An Experimental Study on Spark Ignition Mechanism and Distributed Combustion Mode	李尚軍; Shang-chun Li
2008-07-10	新潔淨氫能觸媒熱電產生器:製造、量測與模擬; A New Clean Hydrogen-Catalytic-Thermoelectric Power Generator: Manufacture, Measurement and Simulation	張瑞文; Ray-wen Chang
2008-07-10	幾何模型最佳投影視角分析; The Best Viewpoint Projection Analysis of Geometric Models	侯嘉琳; Jia-lin Hou
2008-07-09	在不同氣氛下Al-6Zn-XMg(X=0,2wt%)熱合氧化膜的成長機制; Thermally formed oxide films on Al-6Zn-XMg(X=0,2wt%) alloys heated in different gases	陳諄修; Juen-shiou Chen
2008-07-09	利用紋理濾除方式於彩色濾光片瑕疵檢測; Color Filter Defect Inspection by Removing Directional Texture	廖育昇; Yu-sheng Liao
2008-07-09	不同冷卻速率於鎂鋁合金之熱分析研究; Thermal analysis of magnesium-aluminum alloys for different cooling rates	周英哲; Ying-jhe Jhou
2008-07-09	應用於股骨長骨骨折回復之C-arm影像輔助手術導引系統; C-arm Navigation System for Femoral Shaft Fracture Reduction	陳彥竹; Yen-Chu Chen
2008-07-09	永磁式同步電動機的電氣參數估測; Parameters Estimation of the Permanent Magnet Synchronous Motor	曾存弘; Tsun-Hung Tseng
2008-07-09	超音波震盪對熔煉鎂合金晶粒細化之研究; The study of grain refinement for magnesium alloys by using ultasonic vibration	施智仁; Jhih-ren Shih
2008-07-09	電滲泵之焦耳熱效應分析; Joule Heating Effects of Electroosmotic Pump	劉政廷; Jheng-ting Liou
2008-07-09	電化學矽加工之研究與分析; The Analysis and Investigation on Silicon Plate by Electrochemical Machining	紀朝傑; Chao-Jie Ji
2008-07-09	條紋式塗佈暫態過程之觀察; The Investigation of Transient Stripe Coating Process	陶麒鈺; Chi_yu Tao
2008-07-09	以肌電訊號估測肌力之研究; Isotonic elbow joint torques estimation from surface EMG signal using an artificial neural network model	阮天佑; Tian-You Ruan
2008-07-09	肢體同動機械手臂系統之設計與研究; Design and Resarch of EMG-based Upper limb Motion Synchronization Robotic Arm System	白鎧綸; Kai-Lung Bai
2008-07-09	應用奇異值矩陣分解及最佳分區方法於液晶顯示器之Mura缺陷自動檢測; TFT-LCD Mura Defects Automatic Inspection system using Singular Value Decomposition and Optimal division method	郭保鑫; Bao-shin Kuo
2008-07-09	膝關節局部表面重建研究; A research on surface reconstruction for partial knee surface repairing	蘇文; Vincent So
2008-07-08	直齒錐形齒輪齒根應力解析計算模式之研究; A study on analytical calculation model for root stresses of straight-toothed conical gears	黃麒; Chi Huang
2008-07-08	具點接觸型態之歪斜軸錐形齒輪對齒面疲勞破壞之初步研究	許昭祥; Chao-Hsing Hsu
2008-07-08	設計與製作圓錐平板型生物反應器; Designed and Validated Cone and Plate Bioreactor	王文甫; Wen-fu Wang
2008-07-08	異質材料（石英/矽）晶圓鍵合之薄膜應力模擬與研究; Dissimilar Material Wafer Bonding - Silicon on Quartz THIM FILMSTRESSES SIMULATION and STUDY	林家慶; Jia-ching Lin