使用覆晶技術之微波與毫米波積體電路 ; Microwave and Millimeter Wave Integrated Circuits with Flip-chip Technique

NCUIR > College of Electrical Engineering & Computer Science > Graduate Institute of Electrical Engineering > Electronic Thesis & Dissertation > Item 987654321/44786

Please use this identifier to cite or link to this item: http://ir.lib.ncu.edu.tw/handle/987654321/44786

Title:	使用覆晶技術之微波與毫米波積體電路;Microwave and Millimeter Wave Integrated Circuits with Flip-chip Technique
Authors:	林柏安;Po-an Lin
Contributors:	電機工程研究所
Keywords:	覆晶;微波積體電路;flip-chip;microwave integrated circuit
Date:	2010-08-25
Issue Date:	2010-12-09 13:55:17 (UTC+8)
Publisher:	國立中央大學
Abstract:	本論文將覆晶技術(Flip-Chip)應用於幾個矽基微波電路中，為之後矽基微波電路的覆晶應用做初步的實現。第一個電路為覆晶式3.5 GHz Doherty功率放大器，此覆晶式Doherty放大器的組成是將電晶體部分覆晶至自己製作的被動元件上，藉由氧化鋁基板上高Q值的被動元件來提升整體放大器的效率。最後量測的結果，在輸出功率1-dB增益壓縮點提前6 dB處，有著20 %的功率增進效率表現。第二個覆晶式電路為覆晶式W頻帶CMOS放大器，與先前的覆晶式Doherty電路不同，此覆晶式W頻帶CMOS放大器為直接覆晶製作完成的W頻帶CMOS放大器晶片於氧化鋁基板上，並在氧化鋁基板上加入覆晶轉接電路的設計。量測結果顯示透過適當的轉接電路設計，可以確實的補償覆晶凸塊的寄生效應對電路造成的影響。最後一個電路為V頻帶的切換式天線陣列，採用巴勒矩陣的架構。其矩陣與天線陣列皆為氧化鋁基板上的被動元件所組成，透過耦合器與延遲線的設計來實現由巴勒矩陣的不同輸入端輸入，在輸出端會得到不同相位差的結果。目前只有製作被動元件的部分，之後會加入主動電路部分來完成整個覆晶式天線陣列的應用。Two microwave integrated circuits (MICs) with flip-chip assembled are demonstrated in the master thesis. The first circuit is a 3.5 GHz Doherty power amplifier with flip-chip assembled. The flipped chip consists of just transistors. Passive elements are developed on Al2O3 ceramics for high Q factor. Efficiency of the PA can be improved by the high Q passive elements. Measured results show 20 % PAE at 6-dB back-off from OP1dB. The second circuit is W-band CMOS power amplifier with flip-chip assembled. Different with the previous one, this flipped chip consists whole PA circuit. Besides, some transition network are made on Al2O3 ceramics. By appropriate transition network design, parasitics of the bump can be compensated. Last circuit is V-band switching antenna array by the use of Bulter matrix. The matrix part and anntnna array are made on Al2O3 ceramics. By couplers and delay lines, output signals at output ports of Bulter matrix shows specific phase difference when the input signal is injected into different input ports. For future work, we will add active circuits to realize the switching antenna array with flip-chip assembled.
Appears in Collections:	[Graduate Institute of Electrical Engineering] Electronic Thesis & Dissertation

Files in This Item:

File	Description	Size	Format
index.html		0Kb	HTML	582	View/Open

社群 sharing

Loading...