具挫屈控制機制之隅撐構架耐震行為研究 ; Performance of frame structure with various knee brace arrangement

NCU Institutional Repository > 工學院 > 土木工程研究所 > 博碩士論文 > Item 987654321/46292

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/46292

题名:	具挫屈控制機制之隅撐構架耐震行為研究;Performance of frame structure with various knee brace arrangement
作者:	李宗儔;Zong-Chou Li
贡献者:	土木工程研究所
关键词:	隅撐構架;挫屈控制機制;耐震設計;knee-braced moment resisting frame;controllable buckling mechanism;seismic design
日期:	2010-12-21
上传时间:	2011-06-04 14:54:24 (UTC+8)
摘要:	本研究針對具不同挫屈控制機制隅撐之隅撐抗彎構架進行反覆載重實驗，以界定其耐震性能，由研究結果得知，隅撐抗彎構架中，若加大隅撐尺度則其強度、勁度均將提高，然若隅撐挫屈強度過大則結構強度將由梁構件之破壞控制，因此強度過大之隅撐配置，對於結構耐震性能之提升並無助益。實驗結果亦發現，隅撐挫屈之發生位移比與構架行為有關，若其過早發生，則結構強度及勁度之提升有限；隅撐鋼結構之耐震性能與其隅撐配置方向及尺度有關，在相同切削長度下有效斷面積愈大其消能行為愈佳，另就隅撐構架之設計而言，配置面內挫屈隅撐，應為一較佳之選擇。 This study focused on the experimental evaluation of the knee-braced moment resisting frames (KBRFs). A series of cyclic loading tests were conducted on the special moment resisting frame (SMRF) and KBRF frames with knee braces applied in the in-plane and out-of-plane buckling directions. It was found from the tests that the structural stiffness of KBRFs increased when knee braces with larger dimensions were used. It was also found from the comparisons that the strength of the knee-braced frames was significantly enhanced no matter the knee braces buckled in the in-place or out-of-plane direction. However, the drift at which the knee brace members reached the buckling stage was higher for KBRF frames with braces installed in the in-plane buckling direction. This phenomenon led to higher energy dissipation that is essential to the effective seismic design of structures. Therefore, it is suggested that braces with in-plane buckling pattern be adopted in the seismic designs of KBRF frame structures.
显示于类别:	[土木工程研究所] 博碩士論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	580	检视/开启

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing

数据加载中.....