Tensile deformation micromechanisms for bulk metallic glass matrix composites: From work-hardening to softening

NCU Institutional Repository > 工學院 > 化學工程與材料工程學系 > 期刊論文 > Item 987654321/49977

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/49977

题名:	Tensile deformation micromechanisms for bulk metallic glass matrix composites: From work-hardening to softening
作者:	Qiao,JW;Sun,AC;Huang,EW;Zhang,Y;Liaw,PK;Chuang,CP
贡献者:	化學工程與材料工程學系
关键词:	NANOSTRUCTURE-DENDRITE COMPOSITE;MECHANICAL-PROPERTIES;ENHANCED PLASTICITY;AMORPHOUS-ALLOYS;DUCTILITY;MICROSTRUCTURE;BEHAVIOR
日期:	2011
上传时间:	2012-03-27 16:27:53 (UTC+8)
出版者:	國立中央大學
摘要:	A Ti-based bulk metallic glass matrix composite (BMGMC) with a homogeneous distribution of dendrites and the composition of Ti(46)Zr(20)V(12)Cu(5)Be(17) is characterized by a high tensile strength of similar to 1640 MPa and a large tensile strain of similar to 15.5% at room temperature. The present BMGMC exhibits the largest tensile ductility and highest fracture absorption energy under the stress-strain curve of all dendrite-reinforced BMGMCs developed to date. Tensile deformation micromechanisms are explored through experimental visualization and theoretical analyses. After tension, fragmentation of the dendrites, rather than crystallization within the glass matrix and/or atom debonding near the interface of dual-phase composites, is responsible for the high tensile ductility. The subdivisions within the interior of dendrites are separated by shear bands and dense dislocation walls, and local separation of dendrites under modes I and II prevails. The multiplication of dislocations, severe lattice distortions, and even local amorphization dominate within the dendrites. Good structural coherency of the interface is demonstrated, despite being subjected to significant plastic deformation. Theoretical analyses reveal that the constitutive relations elastic-elastic, elastic-plastic, and plastic-plastic of dual-phase BMGMC generally correspond to the (1) elastic, (2) work-hardening, and (3) softening deformation stages, respectively. The capacity for work-hardening is highly dependent on the large plastic deformation of the dendrites and the high yield strength of the glass matrix. The present study provides a fundamental basis for designing work-hardening dual-phase BMGMCs exhibiting remarkably homogeneous deformation. Crown Copyright (C) 2011 Published by Elsevier Ltd. on behalf of Acta Materialia Inc. All rights reserved.
關聯:	ACTA MATERIALIA
显示于类别:	[化學工程與材料工程學系 ] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	631	检视/开启

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing

数据加载中.....