Electrophoretic deposition characteristics of an electrical discharge machined micro-tool for micro-hole polishing in quartz

NCU Institutional Repository > 工學院 > 機械工程學系 > 期刊論文 > Item 987654321/50076

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/50076

题名:	Electrophoretic deposition characteristics of an electrical discharge machined micro-tool for micro-hole polishing in quartz
作者:	Yang,CK;Hung,JC;Cheng,CP;Lin,WT;Yan,BH
贡献者:	機械工程學系
关键词:	GLASS
日期:	2010
上传时间:	2012-03-27 17:02:55 (UTC+8)
出版者:	國立中央大學
摘要:	This paper examines micro-hole polishing in quartz by a micro-tool coated with SiC particles by electrophoretic deposition (EPD). Quartz is a hard and brittle material, difficult to polish and fractures occur easily. Moreover, micro-hole machining by micro ultrasonic machining (MUSM) often fills the micro-hole wall with micro-chips and micro-cracks, which necessitate further polishing for better surface quality. In this paper, a micro-tool was developed for polishing micro-holes in quartz. The micro-tool was fabricated by wire electrical discharge grinding (WEDG) and had a diameter of 100 mu m. A layer of SiC particles was coated onto the micro-tool by EPD. To achieve better polishing results, optimal parameters for obtaining a uniform and stable layer by EPD were first explored. After EPD, the micro-tool was employed to polish micro-holes in quartz with the help of ultrasonic vibration machining (USM). Experimental results show that polishing for a duration of 30 min at a rotational speed of 2500 rpm using 0.25 mu m SiC particles at an ultrasonic amplitude of 6.3 mu m can improve the surface roughness of a micro-hole wall with R(max) being reduced from 0.48 mu m to 0.08 mu m.
關聯:	JOURNAL OF MICROMECHANICS AND MICROENGINEERING
显示于类别:	[機械工程學系] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	496	检视/开启

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing

数据加载中.....