Rapid mold temperature control in injection molding by using steam heating

NCU Institutional Repository > 工學院 > 機械工程學系 > 期刊論文 > Item 987654321/50142

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/50142

题名:	Rapid mold temperature control in injection molding by using steam heating
作者:	Jeng,MC;Chen,SC;Minh,PS;Chang,JA;Chung,CS
贡献者:	機械工程學系
关键词:	SURFACE;SIMULATIONS;SYSTEMS;PARTS
日期:	2010
上传时间:	2012-03-27 17:04:25 (UTC+8)
出版者:	國立中央大學
摘要:	The rapid heating cycle has the advantage of improving product quality in injection molding. In this study, steam heating was combined with cool water on the same mold design to achieve dynamic mold surface temperature to establish control. By applying the steam system on a TV housing mold, the advantage of using steam heating for injection molding was then evaluated and compared with water heating by experiment and simulation. The effect of steam on the quality of the part was also studied. Results showed that as steam was used, the heating time of the simple mold plate can be reduced from 18s to 8 s with the heating rate of 9 degrees C/s, and the cooling time is reduced over water heating. When the target temperature is changed from 70 degrees C to 110 degrees C, the heating time of the TV housing mold plate varies from 7 s to 19 s. For the product quality, steam heating showed an improvement in both the gloss and hardness of the TV housing. Crown Copyright (C) 2010 Published by Elsevier Ltd. All rights reserved.
關聯:	INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER
显示于类别:	[機械工程學系] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	376	检视/开启

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing