Effect of Voltage Supply Mode on Electrolytic Machining of Polycrystalline Silicon

NCU Institutional Repository > 工學院 > 機械工程學系 > 期刊論文 > Item 987654321/50217

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/50217

题名:	Effect of Voltage Supply Mode on Electrolytic Machining of Polycrystalline Silicon
作者:	Yu,PH;Wu,KL;Lee,SM;Yan,BH
贡献者:	機械工程學系
关键词:	EDM SURFACES;DESIGN;TECHNOLOGY;FINISH;TOOL
日期:	2011
上传时间:	2012-03-27 17:06:45 (UTC+8)
出版者:	國立中央大學
摘要:	Wire electric discharge machining (WEDM) of polycrystalline silicon (polysilicon) involves high-temperature melting that easily produces cracks on the wafer surface. This study explored the removal of surface defects by electrolytic machining (EM) to enhance surface quality. EM of polysilicon was conducted under different voltage supply modes, namely, DC voltage (DC-V), pulse voltage (Pulse-V), and auxiliary pulse voltage (Auxiliary-P-V) to examine their effects on material removal (MR) and surface roughness (SR). Results show that poor surface quality was achieved by EM with DC-V mode due to accumulation of bubbles between electrode gaps and inefficient MR. In contrast, EM with Pulse-V supply can reduce SR by proper control of pulse voltage cycle through adjustment in pulse-on and pulse-off time to ensure good replenishment of electrolyte. Finally, adding an optimal auxiliary voltage to the pulse cycle contributes to EM stability. Hence, EM with Auxiliary-P-V supply is an effective approach to electrolytic machining of WEDMed polysilicon. Not only is high MR achieved, but good surface quality is also maintained.
關聯:	MATERIALS AND MANUFACTURING PROCESSES
显示于类别:	[機械工程學系] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	459	检视/开启

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing

数据加载中.....