機械手臂控制和夾爪機構設計之研究

NCU Institutional Repository > 工學院 > 機械工程研究所 > 博碩士論文 > Item 987654321/53072

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/53072

题名:	機械手臂控制和夾爪機構設計之研究
作者:	陳建初;Chien-chu Chen
贡献者:	機械工程研究所
关键词:	機械夾爪;微處理器;壓力感測器;gripper of three fingers;Micro-controller Unit;robot;force sensor
日期:	2012-03-29
上传时间:	2012-06-15 19:39:09 (UTC+8)
摘要:	我們設計出裝載三個關節手指的機械夾爪，由馬達帶動一導螺桿，使導螺桿上的滑塊往上或往下移動，進而帶動固定於手指傳動軸上的三個連桿，讓三爪齒輪關節手指做出抓取或放開的動作，至於抓取的力道，則是由我們安裝在手指端的壓力感測器來決定，最後可以一個固定力抓起我們要的物品，控制器的部分，我們是以微處理器dspic30f4011和TOSHIBA-TB6549PG驅動IC組成電路控制夾爪。Nowadays, the robot plays an important role in the industry automation. The robot manipulator and the robot gripper can be adopted in not only the delicate robots but also the industrial gripper which are commonly used in the general factories. The robot manipulator and gripper help us a lot in many aspects, especially in the production efficiency and in the enhancement of product quality. In this project, designing the robot gripper of three fingers and then putting them into practice in grabbing the object have been performed. This robotic system consists of the scorbot-er VII, the gripper and the force sensor, the Self-propelled vehicle and the controller. The controller includes microprocessor dspic30f4011 and driver IC TOSHIBBA-TB6549PG. Experimental studies have been conducted to verity that the designed gripper can be successfully controlled to grip an object with a constant force.
显示于类别:	[機械工程研究所] 博碩士論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	799	检视/开启

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing

数据加载中.....