探討新穎LED導光棒的V型微結構對出射光方向性之影響與設計;The study and design of the V-grooves of the new type LED light guide bar relative to the illumination angle

NCUIR > Engineering College > Graduate Institute of opto-Mechatronics > Electronic Thesis & Dissertation > Item 987654321/53726

Please use this identifier to cite or link to this item: https://ir.lib.ncu.edu.tw/handle/987654321/53726

Title:	探討新穎LED導光棒的V型微結構對出射光方向性之影響與設計;The study and design of the V-grooves of the new type LED light guide bar relative to the illumination angle
Authors:	林柏翰;Lin,Bo-Han
Contributors:	光機電工程研究所
Keywords:	導光棒;V型微結構;出射光角度;Light guide bar;V-grooves;Illumination angle
Date:	2012-07-29
Issue Date:	2012-09-11 18:12:31 (UTC+8)
Publisher:	國立中央大學
Abstract:	本研究以幾何光學為基礎，探討新穎LED導光棒的V型微結構對出射光方向性之影響，並提出一種V型微結構的設計概念。內容以使用反射片的導光棒為模型，搭配光學模擬軟體對導光棒進行設計，針對V型微結構的幾何參數相對於出射光角度及出射光強度分佈進行分析，藉此討論V型微結構的光學特性。綜合導光棒V型微結構參數之模擬結果，我們發現V型微結構的角度及密度參數，皆會影響出射光線的方向性，因此，對於導光棒的設計上，以出射光線的直向性與出射光強度分佈集中於正向角±25度區間為目標，調整出較佳的V型微結構角度和密度參數。為了有效達到控制出射光方向及出射光均勻度的目的，我們提出一種特殊V型微結構組合的概念，考慮至少雙V型微結構組合為一基本導光微結構單元。在基本導光微結構單元的結構參數經過適當的設計後，再針對此導光微結構單元的分佈密度進行設計，以達到出射光均勻度的要求目標。光線經過適當分佈的導光微結構單元後，若和一般常用的V型微結構(底角皆為45度)相比，我們的設計至少可將於正向角±25度範圍內的出射光線能量提高10%，且主要出射光角度接近0度，而出射光強度分佈亦具對稱性。In this thesis, we integrated the LED light guide bar based on concave V-shaped grooves with reflective sheets which are demonstrated by using optical simulation software. We try to recommend the concepts of design after analyzing the geometric parameters of V-shaped grooves influence on the light emitting in the front direction and the illumination angle distribution. The goal of this study is to propose a LED light guide bar model that is demonstrated to make the light emitting in the front direction, and the illumination angle distribution between ±25 with our designed using reflective sheets. After discussing the relationship between V-shaped grooves and the output light, we make at least a group of two V-shaped grooves as a micro-prism unit that are the same shape with density and angle. By using optical simulation software to control the distribution of illumination angle, the structure parameters of micro-prism unit and distribution are considered. It is found that the illumination angle of LED light guide bar is most concentrated within ±25 degrees.
Appears in Collections:	[Graduate Institute of opto-Mechatronics] Electronic Thesis & Dissertation

Files in This Item:

File	Description	Size	Format
index.html		0Kb	HTML	1076	View/Open

社群 sharing

Loading...