English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 81025/81025 (100%)
造訪人次 : 46004061      線上人數 : 627
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋


    請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/53795


    題名: 旋轉鼓內密度效應對條紋狀分離現象之影響;Streak Patterns of Density Segregation in a Thin Rotating Drum
    作者: 粘煥章;Nien,Huan-chang
    貢獻者: 機械工程研究所
    關鍵詞: 顆粒流;條紋狀分離;旋轉鼓;Radial Segregation;Rotating Drum;Streak Patterns;Granular Flow
    日期: 2012-06-29
    上傳時間: 2012-09-11 18:16:26 (UTC+8)
    出版者: 國立中央大學
    摘要: 本文主要是以實驗方法探討不同密度顆粒體於類二維旋轉鼓系統中,因物理性質的差異所造成之條紋狀分離現象。並分析旋轉鼓轉速之快慢、密度比之不同、安息角角度之大小,以及粒子填充率之高低對分離圖案所造成的影響。實驗過程中,以高畫質數位攝影機與高速攝影機拍攝顆粒體在旋轉鼓中因密度差異所造成之分離現象,並以影像分析方法及粒子追蹤技術計算分離現象達到穩態後的條紋數目及顆粒體的傳輸性質,其後也計算條紋圖形的面積以及周長,進而求得該圖形之形狀指標。本文更引用了該指標來量化分離圖案變化的過程,並進行分析與比較。本研究的實驗結果顯示,我們成功的以實驗方法做出由密度分離效應所產生之條紋狀分離現象,這在之前的文獻中並沒有被探討過。且由實驗結果發現,若要在密度效應下形成規律且穩定的條紋狀分離圖案,所需要的是兩顆粒間差異較大的安息角與密度。而最重要的一點是,顆粒體的密度差異並不是造成條紋狀分離形成的主要原因。因此,我們可以根據不同之實驗結果,並利用無因次安息角差值及密度比值畫出一相圖區間。將所有條件分成條紋狀分離、核心狀分離及混合三個部份,用以表示顆粒體在不同條件下之分離圖形。我們也發現到,無因次安息角差值、密度比以及旋轉鼓轉速皆會嚴重影響到條紋形成的花瓣數目。而最後本實驗也發現,在相同的配置且改變不同粒子填充率的情況下,條紋的圖形以及形狀指標都會明顯受到旋轉鼓內填充率高低的影響。Granular segregation in a rotating drum occurs due to the differences in either particle size or density. This study investigates experimentally the streak segregation patterns in binary mixtures of different density particles (D-system) in a circular thin rotating drum. The influences of rotational speed, density ratio, angle of repose and fill level on streak segregation are studied. The particles motions are recorded by the high definition DV and high-speed camera. Image processing technology and particle tracking method are employed to determine the number of petals, granular transport properties and shape index of streak patterns. Additionally, the parameter of shape index is defined to quantify the process of formation of segregation patterns.The streak segregation patterns due to density effect are successful measured in this paper. The result is interesting and not be studied in the previous literatures. The results show that the binary mixtures require significant difference of repose angles and density ration to generate a regular and stabilization streak patterns. We also find that the density ratio of particle is not the dominate parameter to influence the formation of streak segregation patterns. A phase diagram is determined to identify three regimes about segregation patterns. Additionally, we also find that the dimensionless difference of repose angle, density ratio, rotational speed and fill level all play crucial roles in the number of petals in the streak segregation patterns.
    顯示於類別:[機械工程研究所] 博碩士論文

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    index.html0KbHTML675檢視/開啟


    在NCUIR中所有的資料項目都受到原著作權保護.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明