中大機構典藏-NCU Institutional Repository-提供博碩士論文、考古題、期刊論文、研究計畫等下載:Item 987654321/54173
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 72880/72880 (100%)
造訪人次 : 23168139      線上人數 : 442
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋


    請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/54173


    題名: 在陶瓷基板實現高速穿孔架構之5-Gbps光學連接模組;5-Gbps Optical Interconnect Module Realized on Ceramic Substrate with High-Speed Via-Hole Structure
    作者: 蔡和諺;Tsai,Ho-yen
    貢獻者: 光電科學研究所
    關鍵詞: 光學連接模組;系統級封裝;穿孔;optical interconnect module;SiP;via-hole
    日期: 2012-07-03
    上傳時間: 2012-09-11 18:38:51 (UTC+8)
    出版者: 國立中央大學
    摘要: 在本論文中,提出在陶瓷基板實現高速穿孔架構之5-Gbps光學連接模組,以系統級封裝(System in Package, SiP)之技術,將光學次封裝平台(Optical Sub-Assembly, OSA)、發射端驅動IC和接收端TIA整合至陶瓷基板上,其中發射端驅動IC和接收端TIA的封裝是以覆晶接合(Flip-Chip Bonding)方式所完成,且以高速穿孔連接光學次封裝平台與印刷電路板之間的三維訊號傳遞。首先,我們從設計端評估適用於此模組的被動電路,包含高速穿孔、單端訊號(Single-Ended)傳輸線和差動訊號(Differential)傳輸線的散射參數(Scattering Parameter)模擬和量測;傳輸線和高速穿孔架構是以共平面波導(Coplanar Waveguide, CPW)的方式來設計。由高速穿孔和差動傳輸線所構成之被動電路,當操作頻率為5-GHz時,其反射損耗約為-11.84 dB而插入損耗約為-1.7 dB。在整體模組的高頻特性上,實際量測5-Gbps眼圖,證明高速穿孔與光連接垂直整合架構是具有可行性的和未來發展的潛力。In this thesis, a 5-Gbps optical interconnect module realized on a ceramic substrate with high-speed via-holes is proposed. An optical sub-assembly (OSA), a transmitter driver IC, and a receiver TIA are combined on a ceramic substrate using the system in packaging (SIP) technology. In the packaging approaches, the transmitter driver IC and receiver TIA are assembled using the flip-chip bonding method. Then, the solder bumps are applied to assemble the proposed optical interconnect module onto the printed circuit board (PCB). Finally, high-speed via-holes provide 3-D signal connectivity between OSA and PCB. As a result, a 3-D optical interconnect module has been demonstrated. In the design, the simulation and measurement results of S-parameters are analyzed for the passive circuit with high-speed via-holes, single-ended transmission lines, and differential transmission lines. Both high-speed via-holes and transmission lines are designed based on the coplanar waveguide structure. The module consisting of high-speed via-holes and differential transmission lines is also analyzed. Its return loss and insertion loss are -11.84 and -1.7 dB, respectively, at 5-GHz. The eye diagram of whole module has been validated at the data rate of 5-Gbps. The high-speed via-holes in the module is practicable in the application of optical interconnect.
    顯示於類別:[光電科學研究所] 博碩士論文

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    index.html0KbHTML765檢視/開啟


    在NCUIR中所有的資料項目都受到原著作權保護.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回饋  - 隱私權政策聲明