中大機構典藏-NCU Institutional Repository-提供博碩士論文、考古題、期刊論文、研究計畫等下載:Item 987654321/62564
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 78728/78728 (100%)
造访人次 : 33555941      在线人数 : 706
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜寻范围 查询小技巧:
  • 您可在西文检索词汇前后加上"双引号",以获取较精准的检索结果
  • 若欲以作者姓名搜寻,建议至进阶搜寻限定作者字段,可获得较完整数据
  • 进阶搜寻


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/62564


    题名: 高效率新型超淺接面矽晶太陽電池關鍵技術之研發與製作;The Research and Fabrication of High Efficiency Si Crystal Solar Cells with Ultra Shallow Junction
    作者: 張正陽;陳昇暉;利定東;陳一塵;李建階
    贡献者: 國立中央大學光電科學研究中心
    关键词: 光電工程
    日期: 2012-12-01
    上传时间: 2014-03-17 11:51:00 (UTC+8)
    出版者: 行政院國家科學委員會
    摘要: 研究期間:10112~10211;Both high efficiency and low cost are common goal and essential to solar power technologies. Therefore, the crystalline silicon solar cells in research and development become a major focus recently in order to replace the existing traditional petrochemical power generation. For the project, a research and development team expertise and practical discipline from National Central University and the Institute of Nuclear Energy will be formed. Silicon-based doping layer with variable crystalline fractions and passivation layers will be fabricated and investigated by electron cyclotron resonance chemical vapor deposition (ECRCVD) system and the other extended chamber equipped to the ECRCVD.. Based on the previous results for our planning within next two years, we will develop new a high efficiency ultra-shallow junction silicon solar cells, the photoelectric conversion efficiency will be expected higher than 19% in the first year, and higher than 22% in the second year. In addition, electrodes in fabrication for the industrial production will be critical to make the new structure of ultra-shallow junction solar cells and to meet the needs of industrial production of commercialization goal. The two-year project is divided into four main categories: (1) We will establish a fabrication platform and develop the core technologies of “High Efficiency Si Crystal Solar Cells with Ultra-Shallow Junction” by ECRCVD. These objectives, combined with the inherent cost reduction of scalable processes, have encouraged the work for new techniques that result in high crystalline growth of silicon thin films at lower thermal budget. And the fabrication processes of the ultra-shallow junction solar cells are totally comparable with the industrial productions of the c-Si solar cells (2) We will apply high quality passivation layer to suppress the defect density between the c-Si and additional interface that reduces the interface defects from between the carrier recombination rate and the reverse bias saturation current. It is the conventional method for raising the open-circuit voltage. The passivation layer makes the interface defect density less than 1011 cm-2. It reduces the recombination rate and the reverse bias saturation currents 100cms-1 and 10-13 Acm-2 respectively and is expected to enhance the open-circuit voltage more than 0.65V. (3) We will fabricate high quality silicon films doped layers with variable (10-100%) crystalline fractions as the emitter layers and the back side field layers. The emitter thickness less than 50 nm can be controlled and formed with a highly doped ultra-shallow junction which can enhance the short-circuit current due to reduction of the absorption coefficient of the ultra-thin doped layers. Furthermore, back side field layer is applied to reinforce the built-in electric field in order to enhance the carrier collection rate and to decrease the internal recombination velocity in the c-Si. These can make the short-circuit current density of the solar cell greater than 40 mA / cm2. (4) We will design new shapes on electrode for the solar cells since electrode designs in production of silicon solar cells have great effects on the conversion efficiency and fill factor. The electrode shape determines the collected current ohmic losses and shadowing losses. By estimating various losses sources, we will design a minimum loss of electrode in shapes and it can achieve high short circuit current and low series resistance. The fill factor over 78% will be expected by optimizing the electrode design.
    關聯: 財團法人國家實驗研究院科技政策研究與資訊中心
    显示于类别:[光電科學研究中心] 研究計畫

    文件中的档案:

    档案 描述 大小格式浏览次数
    index.html0KbHTML745检视/开启


    在NCUIR中所有的数据项都受到原著作权保护.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明