均溫板性能量測方法之研究;Research of Vapor Chamber Performance Testing Method

NCUIR > Engineering College > Graduate Institute of Mechanical Engineering > Electronic Thesis & Dissertation > Item 987654321/72434

Please use this identifier to cite or link to this item: http://ir.lib.ncu.edu.tw/handle/987654321/72434

Title:	均溫板性能量測方法之研究;Research of Vapor Chamber Performance Testing Method
Authors:	張琞;Chang,Sheng
Contributors:	機械工程學系
Keywords:	均溫板;熱管;熱阻;標準測試;vapor chamber;heat pipe;thermal resistance;standard method
Date:	2016-08-17
Issue Date:	2016-10-13 14:55:36 (UTC+8)
Publisher:	國立中央大學
Abstract:	市面上各家廠商對於均溫板性能之量測皆有不同的測試方法，導致各廠商測量出之實驗數據並沒有比較的相關依據，造成各家廠商難以正確比較其產品性能之優缺、效能之好壞，使市面上均溫板好壞參差不齊，如果能制定標準實驗方法，也就能解決這個問題。　　因此本研究以市面上販售之兩種尺寸之燒結式均溫板，尺寸分別為100mmX100mmX3mm與90mmX90mmX3mm，利用水冷系統測試性能，並使用設計的五種冷卻水套進行測試，冷卻水套分別為無凹槽、直徑5mm圓形凹槽、直徑10mm圓形凹槽、30mmX30mm正方形凹槽及60mmX60mm正方形凹槽，測試結果發現，隨著凹槽變大，軸向熱阻降低，當凹槽變大到達某一尺寸時，軸向熱阻會開始增加，且可以在兩種不同尺寸之均溫板都觀察到這個現象，這是因為冷卻面積變小造成總熱阻上升，所以軸向熱阻也增加，而擴散熱阻則是隨凹槽尺寸變大而增加，因此在凹槽大小為直徑10mm圓形凹槽時，為最佳的量測尺寸。 ;For each company have different vapor chamber performance testing method. So they can not compare the vapor chamber performance that made by different company. That was why the market is flooded with cheap-jack vapor chamber. If we can establish the standard vapor chamber testing method. Then we can solve this problem. 　Accordingly, this research uses two kind of different size vapor chamber(100mmX100mmX3mm and 90mmX90mmX3mm) to do the experimental. And this study uses the water cooling system to test the vapor chamber performance. We design the five cold plates that have different hole size.(no hole, diameter 5mm hole, diameter 10mm hole, 30mmX30mm square hole, 60mmX60mm square hole) then we use these cold plates to test the vapor chamber. In the result show that larger hole size will increase the axial thermal resistance and spreading thermal resistance. When the hole size reach to certain size, the axial thermal resistance will decrease. Because of the larger hole will decrease the heat transfer area. Let the total thermal resistance increase. So the axial thermal resistance will increases. In this research. The diameter 10mm hole is best one to measure the vapor chamber performance.
Appears in Collections:	[Graduate Institute of Mechanical Engineering] Electronic Thesis & Dissertation

Files in This Item:

File	Description	Size	Format
index.html		0Kb	HTML	321	View/Open

社群 sharing

Loading...