論文是以快速吹製成型(Quick Plastic Forming, QPF)製作5083鋁合金及超塑性5083鋁合金製作金屬手機外殼進行研究探討，實驗研究討論以最快時間吹製不同厚度AA5083鈑材，並比較AA5083及SPF5083兩種材料的差異，以微觀結構方面來觀察及討論AA5083一般晶粒及SPF5083細晶材料討論原材料及加工後材料的差異性，在以各種不同機械性質及成型的厚薄均勻度、尺寸大小結果來探討及評估最快及最有效率的吹製時間。實驗主要分成三個部分，第一部分是討論AA5083鋁合金0.8mm鈑片、第二部分是討論AA5083鋁合金金屬鈑片0.6mm鈑片、第三部分是討論AA5083及SPF5083鋁合金0.9mm鋁合金金屬鈑片並整合各部分時間對於尺寸與厚薄均勻度的影響。;The paper is based on Quick Plastic Forming (QPF), which is made of 5083 aluminum alloy and superplastic 5083 aluminum alloy to make metal mobile phone casing. The experimental research discusses the fastest time to blow different thickness AA5083 coffins and compare them. The differences between AA5083 and SPF5083 materials are observed and discussed in terms of microstructure. The differences between AA5083 general grain and SPF5083 fine-grained materials are discussed. The thickness and uniformity of the raw materials and processed materials are discussed in various mechanical properties. Size results to explore and evaluate the fastest and most efficient blowing time. The experiment is mainly divided into three parts, the first part is to discuss AA5083 aluminum alloy 0.8mm material, the second part is to discuss AA5083 aluminum alloy metal material 0.6mm material, the third part is to discuss AA5083 and SPF5083 aluminum alloy 0.9mm aluminum alloy metal material and integrate The effect of each part time on size and thickness uniformity.
