中大機構典藏-NCU Institutional Repository-提供博碩士論文、考古題、期刊論文、研究計畫等下載:Item 987654321/82735
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 80990/80990 (100%)
造訪人次 : 41676491      線上人數 : 1473
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋


    請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/82735


    題名: 立方衛星高光譜儀成像系統開發以及校正;The development and the calibration of the CubeSat hyperspectral imaging system
    作者: 涂家豪;Tu, Chia-Hao
    貢獻者: 太空科學與工程研究所
    關鍵詞: 高光譜儀;Hyperspectral imaging
    日期: 2020-01-14
    上傳時間: 2020-06-05 17:05:31 (UTC+8)
    出版者: 國立中央大學
    摘要: 高光譜成像儀應用於遙測地球環境很有用的光學儀器。可用於國土調查、水
    汙染防治以及空氣汙染的普查。傳統的高光譜成像儀由物鏡系統 、 分光系統 以及
    成像系統組成,光源自物鏡系統聚焦經分光系統 例如 光柵 散射,並且透過成
    像系統來記錄數百個可見光或者紅外光的帶寬。人們利用光譜特徵來辨識物質,
    高光譜成像應用於眾多領域包含農業與水資源控制、醫學診斷以及軍事防禦等。
    我們設計可放置於立方衛星高光譜成像儀的工程模型,特色為體積小、重量
    輕以及成本較低,其連續光譜帶範圍在 460nm 650nm ,擁有高光譜分辨率 (~5nm 。
    此儀器使用推掃式方法來獲取高光譜影像,視角大約在 2.85 度,在高度 500 公
    里的掃描幅寬為 23.5 公里,中心波長為 550nm 半高全寬為 5 nm ,重量約為 3 公
    斤。我們進行了以下實驗確認儀器 效能:包含 組裝位置校正 、 波長校正 、絕對光
    強度測量以及光譜分辨率及視角測試, 實驗 的結果 後確認符合規格需求,並且進
    行室外實地拍攝,將二維空間數據以及一維光譜數據組成三維高光譜立方數據。
    我們計畫發展飛行模型儀器未來將放置於探空火箭和微衛星任務。;The hyperspectral imager is a useful optical instrument for remote sensing of Earth environments. The applications of the hyperspectral imager include land resource assessment, water pollution investigation, and survey on air pollution. The traditional hyperspectral imager consists of object lens system, the spectrometer system, and the imaging system. The detected light from the object lens system is dispersed by a spectrometer system (e.g., grating), and sequentially recorded as the hundreds of bandwidths of the visible/infrared emission by the imaging system. People use the characteristics of spectral to identify substances. Hyperspectral imaging has been applied for numerous applications, including agricultural and water resources control, medical diagnosis and military defense.
    We design the engineering model of the CubeSat hyperspectral imaging system with a continuous emission band between 460-650 nm with high wavelength resolution (~5nm). The instrument features weight light, size small and cost low that uses a push-broom method to acquire hyperspectral images, FOV (field of view) is about 2.85 °. Its swath width is about 23.5 kilometers at the height of 500 kilometers. The centered wavelength of the spectral range is designed at the wavelength of 550nm, and its full width at half a maximum is ~5nm. We conducted the following experiments to confirm the performance of the instrument: assembling calibration, wavelength calibration, radiance calibration, test of spectral resolution and FOV measurement. After the experiment, we are confident that it meets the required specifications. We also scanned the outdoor view in a sideway using our hyperspectral imaging system. The recorded hyperspectral data cube is a three-dimensional data composed of two-dimensional
    III
    spatial and one-dimensional spectral data. In the future, we plan to develop the flight model for the sounding rocket and CubeSat missions.
    顯示於類別:[太空科學研究所 ] 博碩士論文

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    index.html0KbHTML168檢視/開啟


    在NCUIR中所有的資料項目都受到原著作權保護.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明