中大機構典藏-NCU Institutional Repository-提供博碩士論文、考古題、期刊論文、研究計畫等下載:Item 987654321/92310
English  |  正體中文  |  简体中文  |  Items with full text/Total items : 80990/80990 (100%)
Visitors : 41645080      Online Users : 1226
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
Scope Tips:
  • please add "double quotation mark" for query phrases to get precise results
  • please goto advance search for comprehansive author search
  • Adv. Search
    HomeLoginUploadHelpAboutAdminister Goto mobile version


    Please use this identifier to cite or link to this item: http://ir.lib.ncu.edu.tw/handle/987654321/92310


    Title: 永磁無刷馬達伺服驅動控制;Permanent Magnet Brushless Motor Servo Drive Control
    Authors: 吳宗祐;Wu, Zong-You
    Contributors: 光機電工程研究所
    Keywords: 伺服馬達;三相永磁無刷馬達;PID控制;偏心誤差;定點數運算;AC Servo Motor;three-phase permanent magnet synchronous motor;PID control;eccentricity error;fixed-point arithmetic
    Date: 2023-07-25
    Issue Date: 2024-09-19 15:45:49 (UTC+8)
    Publisher: 國立中央大學
    Abstract: 本研究目的在探討三相同步無刷馬達的伺服驅動控制。控制系統的硬體使用ATmega128微控制器,並配合相應的驅動電路驅動馬達。在運算方法上,使用定點數運算代替浮點數運算,提高運算速度,加快控制頻率。

    控制迴路採用雙迴路回授設計,電流大小與激磁角度分別對誤差量進行回授控制,電流回授使用PI控制,激磁角回授則使用I控制與遺忘因子。

    本研究所使用的磁性編碼器的磁鈕安裝於後出軸上,而霍爾感測器安裝在定子上,因此安裝時會有偏心誤差。為了提高伺服控制時的精度,本研究將對磁性編碼器的偏心誤差建模及校正,從而得到更準確的角度值。
    ;The purpose of this research is to investigate the servo drive control of three-phase synchronous brushless motors. The control hardware utilizes the ATmega128 microcontroller, along with the corresponding driver circuitry for motor operation. Fixed-point arithmetic is employed instead of floating-point arithmetic to accelerate computation and increase control frequency.

    The control loop design adopts a dual-loop feedback approach, incorporating current feedback and magnetic field angle feedback. The current feedback is implemented using a PI controller, while the magnetic field angle feedback employs an I controller with a forgetting factor. This design effectively regulates the motor operation.

    The magnetic encoder’s magnet used in this research is mounted on the motor′s back output shaft, while the magnetic encoder sensor is installed on the stator. Due to potential eccentricity errors during installation, modeling and calibration of the encoder′s eccentricity error are performed to enhance the accuracy of angle measurements in servo control.
    Appears in Collections:[Graduate Institute of opto-Mechatronics] Electronic Thesis & Dissertation

    Files in This Item:

    File Description SizeFormat
    index.html0KbHTML24View/Open


    All items in NCUIR are protected by copyright, with all rights reserved.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明