P-M-N 結構對 N-型碳化矽電化學蝕刻速率之影響;The Influence of P-M-N Structures on the Electrochemical Etching Rate of N-Type Silicon Carbide

NCUIR > Engineering College > Graduate Institute of Mechanical Engineering > Electronic Thesis & Dissertation > Item 987654321/92875

Please use this identifier to cite or link to this item: http://ir.lib.ncu.edu.tw/handle/987654321/92875

Title:	P-M-N 結構對 N-型碳化矽電化學蝕刻速率之影響;The Influence of P-M-N Structures on the Electrochemical Etching Rate of N-Type Silicon Carbide
Authors:	李恕成;Li, Shu-Cheng
Contributors:	機械工程學系
Keywords:	pn 接面;蕭特基能障;疏水性鍵合;陽極氧化;pn junction;Schottky energy barrier;hydrophobic bonding;anodic oxidation
Date:	2023-06-15
Issue Date:	2023-10-04 16:12:33 (UTC+8)
Publisher:	國立中央大學
Abstract:	在對於 n 型碳化矽電化學蝕刻時，由於其主要載流子為電子，而陽極氧化需要電洞才能對 n 型碳化矽進行蝕刻，所以使用 p 型矽形成 pn 接面來輔助碳化矽的蝕刻。本研究在 pn 接面當中加入銅箔，形成兩個金屬-半導體接面通過產生蕭特基能障來降低 pn 接面之間的接面電壓使電洞可以快速的移動到碳化矽表面進行蝕刻，大幅提升蝕刻速度。本研究使用蝕刻液為氫氟酸(47%):酒精(95%)=1:1 進行混合，使用 100mA、300mA、500mA 蝕刻 60 分鐘，並使用掃描式電子顯微鏡 (SEM)、高解析雙束型聚焦離子束系統(FIB)、穿透式電子顯微鏡 (TEM)、光致發光光譜儀(PL)對試片進行進一步分析，發現在使用 p+ 矽與銅箔同時輔助蝕刻時，加速蝕刻效果更好，並且加入銅箔對於結構並無影響。 ;In the electrochemical etching of n-type silicon carbide, because the main carriers are electrons, and anodic oxidation requires holes to etch n-type silicon carbide, so p-type silicon is used to form a pn junction to assist the etching of silicon carbide.In this study, copper foil is added to the pn junction to form two metal-semiconductor junctions. By creating a Schottky energy barrier to reduce the junction voltage between the pn junctions, the holes can quickly move to the silicon carbide surface for further processing. Etching, greatly increasing the etching speed. In this study, the etching solution was mixed with hydrofluoric acid (47%): alcohol (95%) = 1:1, etched at 100mA, 300mA, and 500mA for 60 minutes, and scanned electron microscope (SEM), high-resolution dual-beam Focused ion beam system (FIB), transmission electron microscope (TEM), and photoluminescence spectrometer (PL) further analyzed the test piece, and found that when p+ silicon and copper foil are used to assist etching at the same time, the acceleration time is better. , and the addition of copper foil has no effect on the structure.
Appears in Collections:	[Graduate Institute of Mechanical Engineering] Electronic Thesis & Dissertation

Files in This Item:

File	Description	Size	Format
index.html		0Kb	HTML	22	View/Open

社群 sharing

Loading...